10 open source boards using the TPS61170
Real designs built with the TPS61170, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Magnetometer node mainboard
Benjamin-girard-1
193 × 110 mm297 parts2LNo license0STM32
FOC
IpinZhu
50 × 70 mm112 parts4LMIT0ESP32
Verificationator GP-WS25-26
jcchincheong-bb
120 × 100 mm111 parts2LNo license0ESP32
Fan32-hardware
PfannenHans
63.5 × 74 mm96 parts4LCERN-OHL-P-2.00FPGA
Muon telescope
muonTelescope
108 × 86 mm107 parts4LCERN-OHL-S-2.01ESP32
Geophys mainboard
Benjamin-girard-1
190 × 110 mm272 parts4LNo license0ESP32
Untitled
Benjamin-girard-1
190 × 110 mm269 parts4LNo license0ESP32
Digital test board
Benjamin-girard-1
193 × 110 mm254 parts4LNo license0ESP32
Mainboard v2
Benjamin-girard-1
190 × 110 mm244 parts4LNo license0DAN F10N testboard
Benjamin-girard-1
72 × 106 mm5 parts4LNo license0
How designs wire the TPS61170
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS61170 connects to, and the resistors, capacitors and other passives placed on it.
- The GND pins have a inductor on 4 of 5 designs, most often 10 µH (then 4.7 µH).
- The FB pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ (then 28.7 kΩ).
- The COMP pin has a series resistor on 3 of 5 designs, most often 4.7 kΩ (then 4.99 kΩ).
- The FB pin has a series resistor on 2 of 5 designs, most often 270 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FBpin 1 | Connected to: Signal 80% · GND 20% |
|
| COMPpin 2 | Connected to: Signal 80% · GND 20% |
|
| GNDpin 3, 4, 7 | Connected to: GND 91% |
|
| VINpin 6 | Connected to: VSYS 60% · GND 20% · a signal 20% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Muon telescope by muonTelescope, DAN F10N testboard by Benjamin-girard-1, FOC by IpinZhu and Verificationator GP-WS25-26 by jcchincheong-bb.
The TPS61170 in open source designs
The gallery holds 10 open source boards using the TPS61170 from 5 GitHub repositories; a typical one measures about 155 × 108 mm and carries around 178 components.
80% use four copper layers or more, and 30% carry an open source license.
The most starred is Muon telescope by muonTelescope.
What boards using the TPS61170 are built for
TPS61170: common questions
Where can I find a TPS61170 reference design?
Each of the 10 boards on this page is a real design using the TPS61170. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS61170 GND pin connected?
The GND pins have a inductor on 4 of 5 designs, most often 10 µH (then 4.7 µH). Counted from the KiCad layouts of 5 open source designs using the TPS61170.
What resistor goes on the TPS61170 FB pin?
The FB pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ (then 28.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS61170.
What resistor goes on the TPS61170 COMP pin?
The COMP pin has a series resistor on 3 of 5 designs, most often 4.7 kΩ (then 4.99 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS61170.
Which microcontrollers do boards using the TPS61170 use?
Most are built on ESP32 (7), FPGA (1) and STM32 (1).
How big is a typical board using the TPS61170?
The median is 155 × 108 mm, and 20% are two-layer designs.
What is the most popular open source board using the TPS61170?
By GitHub stars, Muon telescope by muonTelescope, with 1 stars.
Can I simulate one of these boards using the TPS61170 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.