GSP-Motion-Board-Rev.-C
JJ80901·GSP-Motion-Board-Rev.-C
About the GSP-Motion-Board-Rev.-C
GSP-Motion-Board-Rev.-C is an open source ESP32 PCB design by JJ80901, published on GitHub. It is a 4-layer board measuring 55.5 × 34.9 mm, with 40 components from 26 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the TLV62569DBV, MCP73831-2-OT and USBLC6-2SC6. By type, the board carries 14 capacitors, 11 resistors, 4 ICs, 3 diodes, 2 switches and 2 inductors.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Wireless motion board for senior design at Missouri S&T
This board is designed to capture and wirelessly transmit motion data during a frisbee toss. It features an ESP32-C3-Mini-N4 microcontroller for efficient Bluetooth Low Energy (BLE) communication and an ICM-42670 high-precision 6DOF IMU for real-time motion tracking.
The primary goal of this project is to analyze key motion parameters of a frisbee throw, including initial spin rate (RPM), launch angle, stability, and acceleration. The ICM-42670 provides high-resolution accelerometer and gyroscope data, which allows for precise measurement of motion dynamics.
Main components on the GSP-Motion-Board-Rev.-C
GSP-Motion-Board-Rev.-C bill of materials (BOM)
40 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV62569DBV | SOT-23-5 | U100 |
| 1 | MCP73831-2-OT | SOT-23-5 | U101 |
| 1 | ESP32-C3-MINI-1-N4 | XCVR_ESP32-C3-MINI-1-N4 | U200 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U201 |
| 1 | DMG3415U | SOT-23 | Q100 |
| 1 | 1332645 | PHOENIX_1332645 | J200 |
| 1 | ACM2012-900-2P-T002 | FIL_ACM2012-900-2P-T002 | FL200 |
| 1 | ICM-42670-P | XDCR_ICM-42670-P | MT300 |
| 2 | SW_Omron_B3FS | SW_PUSH_6mm | SW200, SW201 |
| 1 | GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D100 |
| 1 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D101 |
| 1 | B5819W | D_SOD-123 | D102 |
| 1 | 120R | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB100 |
| 1 | 10u | IND_VLS4015CX-100M-H | L100 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C100, C101 |
| 2 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C102, C103 |
| 1 | DNP | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C104 |
| 5 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C105, C106, C201, C202, C300 |
| 4 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C200, C203, C301, C302 |
| 2 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R100, R105 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R101, R103 |
| 1 | 22k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R102 |
| 1 | 25k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R104 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R200, R201 |
| 2 | 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R202, R203 |
| 1 | 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R300 |
GSP-Motion-Board-Rev.-C design files
The KiCad project lives in the JJ80901/GSP-Motion-Board-Rev.-C repository on GitHub; these links point at the commit this page was built from.
- LayoutGSP RevC.kicad_pcb
- SchematicGSP RevC.kicad_sch
GSP-Motion-Board-Rev.-C: common questions
What microcontroller does the GSP-Motion-Board-Rev.-C use?
The GSP-Motion-Board-Rev.-C is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the GSP-Motion-Board-Rev.-C?
The GSP-Motion-Board-Rev.-C measures 55.5 × 34.9 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the GSP-Motion-Board-Rev.-C?
40 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the GSP-Motion-Board-Rev.-C design files?
From the JJ80901/GSP-Motion-Board-Rev.-C repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GSP-Motion-Board-Rev.-C design in my own project?
The repository has no license, so all rights stay with JJ80901. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GSP-Motion-Board-Rev.-C without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k