DAC & Headphone Amplifier
jonaheinke·dac·kicad/new_dac/new_dac.kicad_pcb
About the DAC & Headphone Amplifier PCB
DAC & Headphone Amplifier is an open source PCB design by jonaheinke, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 80 mm, with 147 components from 53 distinct parts.
Other key parts include the BD9G101G, LT3088, PCM2706CPJTR, TLV1117LV-33 and PCM5102A. By type, the board carries 60 resistors, 43 capacitors, 13 transistors, 9 diodes, 6 ICs and 6 connectors.
It belongs with the audio and power & battery designs in this gallery.
Main components on the DAC & Headphone Amplifier
DAC & Headphone Amplifier bill of materials (BOM)
147 components, 53 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BD9G101G | SOT-23-6_Handsoldering | U1 |
| 1 | LT3088 | TO-263-3_TabPin2 | U2 |
| 1 | PCM2706CPJTR | TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | TLV1117LV-33 | SOT-223-3_TabPin2 | U4 |
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | LM555xN | DIP-8_W7.62mm | U6 |
| 5 | BCM56DS | SC-74-6_1.5x2.9mm_P0.95mm | Q1, Q5, Q6, Q7, Q12 |
| 4 | BCM53DS | SC-74-6_1.5x2.9mm_P0.95mm | Q2, Q3, Q4, Q13 |
| 4 | 2SC4511 | TO-220F-3_Vertical | Q8, Q9, Q10, Q11 |
| 1 | 12MHz±0.05% | Resonator_Murata | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | Barrel_Jack_Switch | Audio_Jack_SJ-6307 | J2 |
| 1 | Conn_01x04 | PinSocket_1x04_P2.54mm_Horizontal | J3 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4085 | J4 |
| 1 | AudioJack3_Switch | Audio_Jack_SJ-6307 | J5 |
| 1 | AudioJack3_Switch | PinSocket_1x04_P2.54mm_Horizontal | J6 |
| 1 | 500mA | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 4 | Heatsink | Heatsink_Boyd_507302B00000G | HS1, HS2, HS3, HS4 |
| 1 | Ground_Jumper | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | DPDT_Relay | Relay_DPDT_FRT5 | K2 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | RK09L12B | RV1 |
| 2 | QUAD_TVS_5V | SOT-665 | D1, D9 |
| 2 | DUAL_TVS_15V | SOT-23 | D2, D7 |
| 2 | D | SOT-23-3 | D4, D5 |
| 1 | D | D_SOD-323_HandSoldering | D6 |
| 2 | ~ | SOT-23-3 | D10, D11 |
| 1 | 6u8 | L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 11 | 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C7, C9, C10, C14, C15, C18, C21 +3 |
| 14 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C5, C6, C8, C12, C13, C16, C19 +6 |
| 5 | 15n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C25, C30, C31 |
| 1 | 470u | CP_Radial_D13.0mm_P5.00mm | C11 |
| 4 | 2u2 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C20, C26, C46 |
| 1 | 1n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C27 |
| 1 | 4u7 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C33 |
| 1 | 4u7 | C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C34 |
| 1 | 10u | C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C36 |
| 2 | 470u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C39, C40 |
| 2 | 10u | CP_Radial_D13.0mm_P5.00mm | C41, C42 |
| 2 | 5k1 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 5 | 1k5 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7, R30, R39, R41 |
| 2 | 22 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5 |
| 2 | 430k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R10 |
| 3 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R32 |
| 1 | 3k9 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 3 | 680 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R24, R31 |
| 13 | 22k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R16, R19, R22, R33, R34, R37, R38 +5 |
| 6 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15, R20, R53, R54, R62 |
| 5 | 15 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18, R26, R51, R52 |
| 4 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21, R44, R46, R63 |
| 4 | 2k2 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23, R47, R48, R65 |
| 4 | 8R2 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R28, R29, R49, R50 |
| 4 | 4k3 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R35, R36, R40, R42 |
| 2 | 47k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R58, R59 |
DAC & Headphone Amplifier design files
The KiCad project lives in the jonaheinke/dac repository on GitHub; these links point at the commit this page was built from.
DAC & Headphone Amplifier: common questions
How big is the DAC & Headphone Amplifier PCB?
The DAC & Headphone Amplifier measures 100 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DAC & Headphone Amplifier?
147 components, from 53 distinct parts. The full bill of materials is listed on this page.
Where can I download the DAC & Headphone Amplifier design files?
From the jonaheinke/dac repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DAC & Headphone Amplifier design in my own project?
Yes, under the terms of its MIT license, which jonaheinke chose for the repository.
More boards in dac
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k