5 open source boards using the PCM2706CPJTR

Real designs built with the PCM2706CPJTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The PCM2706CPJTR in open source designs

The gallery holds 5 open source boards using the PCM2706CPJTR from 3 GitHub repositories; a typical one measures about 76.5 × 80 mm and carries around 51 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Systemboard by adrianhelfer.

Parts used alongside the PCM2706CPJTR

Microcontrollers on boards using the PCM2706CPJTR

What boards using the PCM2706CPJTR are built for

PCM2706CPJTR: common questions

Where can I find a PCM2706CPJTR reference design?

Each of the 5 boards on this page is a real design using the PCM2706CPJTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PCM2706CPJTR use?

Most are built on ESP32 (1).

How big is a typical board using the PCM2706CPJTR?

The median is 76.5 × 80 mm, and 60% are two-layer designs.

What is the most popular open source board using the PCM2706CPJTR?

By GitHub stars, Systemboard by adrianhelfer, with 0 stars.

Can I simulate one of these boards using the PCM2706CPJTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part