Ummon

JonaWe·ummon·hardware/ummon.kicad_pcb

Ummon PCB layout, top view — open source ESP32 board by JonaWe

About the Ummon PCB

Ummon is an open source ESP32 PCB design by JonaWe, published on GitHub. It is a 4-layer board measuring 60 × 60 mm, with 75 components from 39 distinct parts.

Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the SCD41-D-R2, SGP41-D-R4, SHT41-AD1B-R2, AMS1117-3.3 and CY43-10UH. By type, the board carries 32 capacitors, 19 resistors, 6 ICs, 5 diodes, 4 switches and 3 transistors.

It belongs with the iot & wireless, sensors and displays & leds designs in this gallery.

From the project

ummon (from German Umgebungsmonitor, "environment monitor") is an ESP32-C6 based environmental sensor board with USB-C power. It reads several environmental sensors over I²C and drives an e-paper display (a 7.5" Waveshare panel in this build). The board is a custom 4-layer PCB de

ummon (from German Umgebungsmonitor, "environment monitor") is an ESP32-C6 based environmental sensor board with USB-C power. It reads several environmental sensors over I²C and drives an e-paper display (a 7.5" Waveshare panel in this build). The board is a custom 4-layer PCB designed in KiCad, powered from USB-C with on-board 3.3 V regulation.

- MCU: ESP32-C6-WROOM-1 (Wi-Fi 6, Bluetooth LE, Zigbee/Thread) - Sensors over I²C: - SHT41 for temperature and humidity - SCD41 for CO₂ - SGP41 for VOC / air quality - Display: e-paper via an on-board boost converter for the panel supply rails (7.5"…

Main components on the Ummon

Ummon bill of materials (BOM)

75 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C6-WROOM-1-N8
ESPRESSIF(乐鑫)
U1
1
SCD41-D-R2
SCD41
Sensirion(瑞士盛思锐)
U2
1
SGP41-D-R4
SGP41
Sensirion(瑞士盛思锐)
U3
1
SHT41-AD1B-R2
SHT41
Sensirion(瑞士盛思锐)
U4
1
AMS1117-3.3
Advanced Monolithic Systems
U5
1
CY43-10UH
10μH
SHOU HAN(首韩)
U6
1
BSS138LT1G
onsemi(安森美)
Q1
2
AO3401A
AOS
Q2, Q3
1
AFC11-S24ICC-00
Display
JS(钜硕电子)
P1
1
1206L100/24NR
1A/24V
LUTE(陆特)
F1
1
TS-1088-AR02016
Reboot
XUNPU(讯普)
SW1
1
TS-1088-AR02016
Flash
XUNPU(讯普)
SW2
1
TS-1088-AR02016
Test Button
XUNPU(讯普)
SW3
1
MINI MSK12CO2
SHOU HAN(首韩)
SW4
1
TYPE-C 16PIN 2MD(073)
TYPE-C 16PIN 2MD
SHOU HAN(首韩)
USB1
1
KT-0603R
KENTO
LED1
2
KT-0805G
0805G
KENTO
LED2, LED3
3
LMBR0530T1G
MBR0530
LRC(乐山无线电)
D2, D3, D4
1
SMF5.0A
晶导微电子
D5
1
USBLC6-2SC6
ST(意法半导体)
D6
Show 19 more
QtyPartRefs
13
100NF
100nF
C1, C5, C6, C7, C8, C10, C12, C13 +5
3
C28323
1µF
C2, C3, C40
2
C440198
10µF
C4, C9
1
100nF
C11
3
C12891
22µF
C14, C17, C18
1
C29823
4.7μF
C22
5
C28323
1μF/25V
C24, C28, C30, C34, C36
1
C29823
4.7μF/50V
C26
1
C28323
1μF/10V
C27
2
C28323
1μF/50V
C32, C38
1
4.7Ω
R1
2
5.1kΩ
R2, R3
4
10kΩ
R4, R5, R8, R9
3
4.7kΩ
R6, R7, R18
1
2.2Ω
R10
3
1Ω
R11, R13, R16
2
220Ω
R12, R15
1
1kΩ
R14
2
100kΩ
R17, R19

Ummon design files

The KiCad project lives in the JonaWe/ummon repository on GitHub; these links point at the commit this page was built from.

Ummon: common questions

What microcontroller does the Ummon use?

The Ummon is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.

How big is the Ummon PCB?

The Ummon measures 60 × 60 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Ummon?

75 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ummon design files?

From the JonaWe/ummon repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ummon design in my own project?

The repository has no license, so all rights stay with JonaWe. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ummon without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards