7 open source boards using the SHT41-AD1B-R2
Real designs built with the SHT41-AD1B-R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
CanSat
budabalint
54 × 52 mm439 parts4LNo license0ESP32
Airquality
MorgenWebDigital
45 × 95 mm76 parts2LCustom license0ESP32
Ummon
JonaWe
60 × 60 mm75 parts4LNo license0Nordic nRF
Commonsense hw
antsouchlos
35 × 24 mm32 parts2LMIT0ESP32
Airqualitymini
MorgenWebDigital
40 × 40 mm32 parts2LCustom license0AVR/Arduino
Active ATmega328P 3.3V SHT4x candidate
zhxymj
50 × 55 mm11 parts2LMIT0Display board
mckay27
100 × 103.5 mm57 parts2LNo license0
How designs wire the SHT41-AD1B-R2
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SHT41-AD1B-R2 connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 4 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCL pin has a pull-up to 3.3V on 4 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
- The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: The microcontroller 71%, a connector 43%, SGP41-D-R4 29% |
|
| SCLpin 2 | Connected to: The microcontroller 71%, a connector 43%, SGP41-D-R4 29% |
|
| VDDpin 3 | Connected to: 3.3V 86% |
|
| VSSpin 4 | Connected to: GND 86% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Commonsense hw by antsouchlos, CanSat by budabalint, Ummon by JonaWe and Display board by mckay27.
The SHT41-AD1B-R2 in open source designs
The gallery holds 7 open source boards using the SHT41-AD1B-R2 from 7 GitHub repositories; a typical one measures about 50 × 55 mm and carries around 57 components.
71% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is CanSat by budabalint.
Parts used alongside the SHT41-AD1B-R2
Microcontrollers on boards using the SHT41-AD1B-R2
What boards using the SHT41-AD1B-R2 are built for
SHT41-AD1B-R2: common questions
Where can I find a SHT41-AD1B-R2 reference design?
Each of the 7 boards on this page is a real design using the SHT41-AD1B-R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SHT41-AD1B-R2 SDA pin?
The SDA pin has a pull-up to 3.3V on 4 of 7 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the SHT41-AD1B-R2.
What pull-up resistor is used on the SHT41-AD1B-R2 SCL pin?
The SCL pin has a pull-up to 3.3V on 4 of 7 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the SHT41-AD1B-R2.
What decoupling capacitors do designs use on the SHT41-AD1B-R2 VDD pin?
The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the SHT41-AD1B-R2.
What parts are used alongside the SHT41-AD1B-R2?
The SGP41-D-R4, ESP32-C3-WROOM-02-N4, SCD40-D-R1, SCD41-D-R2 and T117Z appear in the most repositories here.
Which microcontrollers do boards using the SHT41-AD1B-R2 use?
Most are built on ESP32 (4), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the SHT41-AD1B-R2?
The median is 50 × 55 mm, and 71% are two-layer designs.
What is the most popular open source board using the SHT41-AD1B-R2?
By GitHub stars, CanSat by budabalint, with 0 stars.
Can I simulate one of these boards using the SHT41-AD1B-R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.