Toggle
About the Toggle PCB
Toggle is an open source PCB design by jonnor, published on GitHub. It is a 2-layer board measuring 48.5 × 67.7 mm, with 24 components from 9 distinct parts.
Other key parts include the AP3019A. By type, the board carries 12 diodes, 4 connectors, 2 capacitors, 2 resistors, 1 IC and 1 transistor.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Small projects not worthy of dedicated repositories
Etsy.com. Lots of amazing looking products. Mostly rings,pendants. Pure resin or resin+wood. 200-400 NOK. Sometimes glow-in-the-dark. Resin 'stone' with wood base, silver ring inlay. 700-800 NOK.
Maybe silver + resin cast rings has good opportunity? Not found, might be able to push price up.
Oxididation. Electroetching with laser-engraved masks?
Power board for wearable or other battery powered electronics.
Main components on the Toggle
Toggle bill of materials (BOM)
24 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP3019A | SOT-223-6-extraspace | U1 |
| 1 | BSS138L | SOT-23_Handsoldering | Q1 |
| 4 | Conn_01x01 | PinHeader | J1, J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 12 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 1 | L | L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L1 |
| 2 | 1uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 1 | 100k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | 220R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
Toggle design files
The KiCad project lives in the jonnor/projects repository on GitHub; these links point at the commit this page was built from.
Toggle: common questions
How big is the Toggle PCB?
The Toggle measures 48.5 × 67.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Toggle?
24 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Toggle design files?
From the jonnor/projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Toggle design in my own project?
The repository has no license, so all rights stay with jonnor. Use it as a reference, and ask the author before reusing the design.
More boards in projects
Digishaper152
80 × 60 mm60 parts2LNo license43
STM32Projected
28 × 28 mm43 parts2LNo license43
Touchled
23.6 × 23.6 mm18 parts2LNo license43
Linearsource mod
45.7 × 22.2 mm17 parts2LNo license43
AVR/ArduinoTouchuc
13 × 13 mm16 parts2LNo license43
Crystaltriggeramp
25 × 34 mm11 parts2LNo license43
Pendantlight
5 × 40 mm10 parts2LNo license43
Ledbreakout
10 × 10 mm9 parts2LNo license43
Scpu10
83.6 × 21.5 mm8 parts2LNo license43
Touchflower
10.6 × 10.6 mm7 parts2LNo license43
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ControllerCurrentShuntAddOn
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k