Touchflower
About the Touchflower PCB
Touchflower is an open source PCB design by jonnor, published on GitHub. It is a 2-layer board measuring 10.6 × 10.6 mm, with 7 components from 5 distinct parts.
Other key parts include the TPP223-BA6. By type, the board carries 3 connectors, 1 IC, 1 diode, 1 capacitor and 1 resistor.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Small projects not worthy of dedicated repositories
Etsy.com. Lots of amazing looking products. Mostly rings,pendants. Pure resin or resin+wood. 200-400 NOK. Sometimes glow-in-the-dark. Resin 'stone' with wood base, silver ring inlay. 700-800 NOK.
Maybe silver + resin cast rings has good opportunity? Not found, might be able to push price up.
Oxididation. Electroetching with laser-engraved masks?
Power board for wearable or other battery powered electronics.
Main components on the Touchflower
Touchflower bill of materials (BOM)
7 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPP223-BA6 | SOT-223-6-extraspace | U1 |
| 3 | Conn_01x01 | Pin_Header_Straight_1x01_Pitch1.27mm | J1, J2, J3 |
| 1 | LED | LED_1206_HandSoldering | D1 |
| 1 | C | C_0805_HandSoldering | C1 |
| 1 | R | R_0805_HandSoldering | R1 |
Touchflower design files
The KiCad project lives in the jonnor/projects repository on GitHub; these links point at the commit this page was built from.
Touchflower: common questions
How big is the Touchflower PCB?
The Touchflower measures 10.6 × 10.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Touchflower?
7 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Touchflower design files?
From the jonnor/projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Touchflower design in my own project?
The repository has no license, so all rights stay with jonnor. Use it as a reference, and ask the author before reusing the design.
More boards in projects
Digishaper152
80 × 60 mm60 parts2LNo license43
STM32Projected
28 × 28 mm43 parts2LNo license43
Toggle
48.5 × 67.7 mm24 parts2LNo license43
Touchled
23.6 × 23.6 mm18 parts2LNo license43
Linearsource mod
45.7 × 22.2 mm17 parts2LNo license43
AVR/ArduinoTouchuc
13 × 13 mm16 parts2LNo license43
Crystaltriggeramp
25 × 34 mm11 parts2LNo license43
Pendantlight
5 × 40 mm10 parts2LNo license43
Ledbreakout
10 × 10 mm9 parts2LNo license43
Scpu10
83.6 × 21.5 mm8 parts2LNo license43
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ControllerCurrentShuntAddOn
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k