Arduino well
About the Arduino well PCB
Arduino well is an open source ESP8266 PCB design by jonnydyer, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 39 components from 23 distinct parts.
Its main chip is the ESP-01v090, from the ESP8266 family. Other key parts include the LM324 and AP2112K-3.3. By type, the board carries 13 connectors, 13 resistors, 7 capacitors, 3 ICs and 2 transistors.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
Arduino shield ot manage our well
Main components on the Arduino well
Arduino well bill of materials (BOM)
39 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324 | DIP-14_W7.62mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ESP-01v090 | ESP-01 | U3 |
| 2 | Q_NPN_EBC | TO-92L_HandSolder | Q1, Q2 |
| 1 | Conn_02x07_Odd_Even | PinSocket_2x07_P2.54mm_Vertical | J1 |
| 1 | Vsens | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Isense | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | DPsense | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Psense | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Power | Socket_Strip_Arduino_1x08 | P1 |
| 1 | Analog | Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Strip_Arduino_1x08 | P4 |
| 4 | CONN_01X01 | Arduino_1pin | P5, P6, P7, P8 |
| 1 | 10k | Potentiometer_ACP_CA9-VSMD_Vertical_Hole | RV1 |
| 6 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4, C5, C6, C7 |
| 1 | 4.7u | CP_Radial_D8.0mm_P3.50mm | C3 |
| 3 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 4.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 2 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R6 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 47k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9 |
| 1 | 150R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 3 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R12, R13 |
Arduino well design files
The KiCad project lives in the jonnydyer/Arduino_well repository on GitHub; these links point at the commit this page was built from.
- LayoutArduino_LCD.kicad_pcb
Arduino well: common questions
What microcontroller does the Arduino well use?
The Arduino well is built around the ESP-01v090, from the ESP8266 family.
How big is the Arduino well PCB?
The Arduino well measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino well?
39 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arduino well design files?
From the jonnydyer/Arduino_well repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Arduino well design in my own project?
The repository has no license, so all rights stay with jonnydyer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Arduino well without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398