CANSAT ARLISS STM32
About the CANSAT ARLISS STM32 PCB
CANSAT ARLISS STM32 is an open source STM32 PCB design by JosephPalacios-so, published on GitHub. It is a 4-layer board measuring 90 × 75 mm, with 110 components from 48 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the 4754, DRV8874PWPR, BMP581, VEML7700-TR and AP63203QWU-7. By type, the board carries 43 capacitors, 27 resistors, 10 ICs, 7 connectors, 6 LEDs and 3 transistors.
Main components on the CANSAT ARLISS STM32
CANSAT ARLISS STM32 bill of materials (BOM)
110 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL | U1 |
| 1 | 4754 Adafruit | MODULE_4754 | U2 |
| 2 | DRV8874PWPR | HTSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL-EP | U3, U4 |
| 1 | BMP581 Bosch(博世) | LGA-10_L2.0-W2.0-P0.50-TL_BMP581 | U5 |
| 1 | VEML7700-TR | LED-SMD_4P-L6.8-W2.4_VEML7700-TR | U6 |
| 1 | AP63203QWU-7 DIODES(美台) | TSOT-26_L2.9-W1.6-P0.95-LS2.8-BL | U7 |
| 2 | INA226AIDGSR | MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U10, U11 |
| 1 | ADXL375BCCZ | LGA-14_L5.0-W3.0-P0.80-BL | U12 |
| 1 | IRLZ44NPBF | TO-220-3_Horizontal_TabDown | Q1 |
| 2 | AOD4185 AOD4185_C400894 AOS | TO-252-3_L6.6-W6.1-P4.57-LS9.9-BR-CW | Q2, Q3 |
| 1 | X1A0000610006 32.768kHz 7pF SMD | Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | X1 |
| 1 | XTM32008000GT00351001 8Mhz 10pF | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X2 |
| 2 | XT30PW-M | CONN-TH_XT30PW-M | CN1, CN2 |
| 1 | DB127V-5.08-2P-GN-S DORABO(地博电气) | CONN-TH_2P-P5.08 | CN3 |
| 1 | 0430450400 MOLEX | CONN-TH_0430450400 | CN4 |
| 2 | Conn_01x06 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J1, J2 |
| 1 | PZ254R-12-8P | HDR-TH_8P-P2.54-H-M-R2-C4-S2.54 | P1 |
| 1 | LTC1206-1700TS 7A LUTE(陆特) | F1206 | F1 |
| 1 | 0466.750NRHF 750mA Littelfuse(美国力特) | F1206 | F2 |
| 2 | 20K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RIM1, RIM2 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2.2K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RIPR1, RIPR2 |
| 2 | EVQPLMA15 | KEY-SMD_6P-L4.9-4.9-P3.70 | SW1, SW2 |
| 4 | D-060306R1/SS2/L D-R060306L3-KS2 | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1, LED2, LED3, LED5 |
| 2 | D-060306G1/SS2/G1 ~ | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED4, LED7 |
| 2 | D_Zener | D_SOD-123 | D1, D2 |
| 1 | MPZ1608S221ATA00 220Ω@100MHz | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | FTC404020S3R3MGCA 3.3uH cjiang(长江微电) | IND-SMD_L4.1-W4.1_FTC404020S | L2 |
| 17 | TCC0402X7R104J500AT 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C7, C8, C9, C10, C15, C16 +9 |
| 2 | CC0402CRNPO9BN7R0 7pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | GRM155Z71A225KE44D 2.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | CC0402FRNPO9BN100 10pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 3 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C17, C18 |
| 2 | CGA0402X5R105K500GT 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C28 |
| 2 | 22nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C20 |
| 2 | UCM1H101MCL1GS 100uF | CAP-SMD_BD6.3-L6.6-W6.6-FD | C21, C22 |
| 5 | CL21B106KAYQNNE 10uF SAMSUNG(三星) | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27, C30, C31, C32, C33 |
| 2 | C2012X7S1A226MT000E 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C34, C35 |
| 3 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C42, C46, C47 |
| 1 | 0.1uF | C_0603_1608Metric | C45 |
| 4 | RC0603FR-7W10KL 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R16 |
| 1 | RC0603FR-071KL 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 5 | 2.2K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R9, R10, R17, R31 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R18 |
| 4 | RC0603FR-074K7L 4.7K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R20, R21 |
| 1 | 80mΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 6 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R15, R23, R24, R25, R26 |
| 3 | RC0603FR-07100KL 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R32, R33 |
| 1 | 10mΩ | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R22 |
CANSAT ARLISS STM32 design files
The KiCad project lives in the JosephPalacios-so/CANSAT_ARLISS_STM32 repository on GitHub; these links point at the commit this page was built from.
- LayoutARLISS_STM32_2026.kicad_pcb
- SchematicARLISS_STM32_2026.kicad_sch
CANSAT ARLISS STM32: common questions
What microcontroller does the CANSAT ARLISS STM32 use?
The CANSAT ARLISS STM32 is built around the STM32F405RGT6, from the STM32 family.
How big is the CANSAT ARLISS STM32 PCB?
The CANSAT ARLISS STM32 measures 90 × 75 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the CANSAT ARLISS STM32?
110 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the CANSAT ARLISS STM32 design files?
From the JosephPalacios-so/CANSAT_ARLISS_STM32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CANSAT ARLISS STM32 design in my own project?
The repository has no license, so all rights stay with JosephPalacios-so. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CANSAT ARLISS STM32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k