6 open source boards using the VEML7700-TR
Real designs built with the VEML7700-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
HaptiCAD Base
EmielV2002
90 × 90 mm92 parts4LApache-2.01STM32
CANSAT ARLISS STM32
JosephPalacios-so
90 × 75 mm110 parts4LNo license0ESP32
Chipsat v1
noellayang
45.5 × 46 mm59 parts2LMIT0ESP32
Pot pulse
rwrife
70 × 50 mm41 parts4LMIT0ESP32
CanSat2
budabalint
40 × 40 mm102 parts4LNo license0ESP32
Esp cc dimmer
flaviut
68.3 × 52 mm13 parts2LNo license0
How designs wire the VEML7700-TR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the VEML7700-TR connects to, and the resistors, capacitors and other passives placed on it.
- The SCL_1 pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SDA_4 pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The VDD_2 pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL_1pin 1 | Connected to: The microcontroller 100% |
|
| VDD_2pin 2 | Connected to: 3.3V 100% |
|
| GND_3pin 3 | Connected to: GND 100% | — |
| SDA_4pin 4 | Connected to: The microcontroller 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HaptiCAD Base by EmielV2002, CanSat2 by budabalint, Esp cc dimmer by flaviut and CANSAT ARLISS STM32 by JosephPalacios-so.
The VEML7700-TR in open source designs
The gallery holds 6 open source boards using the VEML7700-TR from 6 GitHub repositories; a typical one measures about 69.1 × 51 mm and carries around 76 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is HaptiCAD Base by EmielV2002.
Parts used alongside the VEML7700-TR
What boards using the VEML7700-TR are built for
VEML7700-TR: common questions
Where can I find a VEML7700-TR reference design?
Each of the 6 boards on this page is a real design using the VEML7700-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the VEML7700-TR SCL_1 pin?
The SCL_1 pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 6 open source designs using the VEML7700-TR.
What pull-up resistor is used on the VEML7700-TR SDA_4 pin?
The SDA_4 pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 6 open source designs using the VEML7700-TR.
What decoupling capacitors do designs use on the VEML7700-TR VDD_2 pin?
The VDD_2 pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the VEML7700-TR.
Which microcontrollers do boards using the VEML7700-TR use?
Most are built on ESP32 (4) and STM32 (2).
How big is a typical board using the VEML7700-TR?
The median is 69.1 × 51 mm, and 33% are two-layer designs.
What is the most popular open source board using the VEML7700-TR?
By GitHub stars, HaptiCAD Base by EmielV2002, with 1 stars.
Can I simulate one of these boards using the VEML7700-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.