7 open source boards using the AP63203QWU-7
Real designs built with the AP63203QWU-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ESPDrive
Ehryk
44 × 64 mm53 parts4LBSD-3-Clause2
ESP32ESPRadiator
50 × 57 mm49 parts2LBSD-3-Clause2
SerialGPS
73.7 × 48.9 mm46 parts2LBSD-3-Clause2
ESP32ESPSauna
68.5 × 62 mm45 parts2LBSD-3-Clause2
Garage Assistant
80.8 × 56.9 mm35 parts2LBSD-3-Clause2
AVR/ArduinoRCLight
14.7 × 16.2 mm26 parts2LBSD-3-Clause2
ESP32ESPProbe
47 × 44 mm16 parts2LBSD-3-Clause2
The AP63203QWU-7 in open source designs
The gallery holds 7 open source boards using the AP63203QWU-7 from 1 GitHub repository; a typical one measures about 50 × 56.9 mm and carries around 45 components.
86% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ESPDrive by Ehryk.
Microcontrollers on boards using the AP63203QWU-7
AP63203QWU-7: common questions
Where can I find a AP63203QWU-7 reference design?
Each of the 7 boards on this page is a real design using the AP63203QWU-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP63203QWU-7 use?
Most are built on ESP32 (4) and AVR/Arduino (1).
How big is a typical board using the AP63203QWU-7?
The median is 50 × 56.9 mm, and 86% are two-layer designs.
What is the most popular open source board using the AP63203QWU-7?
By GitHub stars, ESPDrive by Ehryk, with 2 stars.
Can I simulate one of these boards using the AP63203QWU-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.