RPi Car.recovered.2026-05-17 124818

k4i70·Flight-Controller

RPi Car.recovered.2026-05-17 124818 PCB layout, top view — open source STM32 board by k4i70

About the RPi Car.recovered.2026-05-17 124818 PCB

RPi Car.recovered.2026-05-17 124818 is an open source STM32 PCB design by k4i70, published on GitHub. It is a 4-layer board measuring 36.5 × 36.5 mm, with 67 components from 37 distinct parts.

Its main chip is the STM32H743VITX, from the STM32 family. Other key parts include the ICM-42688-P, AP63203WU-7, AP63205WU-7, TLV75533PDBV and MAX7456EUI_. By type, the board carries 33 capacitors, 16 resistors, 8 ICs, 3 inductors, 2 crystals and 2 connectors.

It belongs with the robotics & motion designs in this gallery.

From the project

Custom Betaflight Quadcopter PCB built in KiCad

Personal project to design my own PCB and get more familiar with microcontrollers.

Main components on the RPi Car.recovered.2026-05-17 124818

RPi Car.recovered.2026-05-17 124818 bill of materials (BOM)

67 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ICM-42688-P
U2
1
AP63203WU-7
U3
1
AP63205WU-7
U4
1
TLV75533PDBV
U5
1
MAX7456EUI_
U6
1
W25Q32JVSS
U7
1
STM32H743VITX
STM32H743VITx
U8
1
IP4234CZ6
U9
1
27MHZ
27MHz
Y1
1
25MHZ
25mHz
Y2
1
UJ31-CH-G2-SMT
UJ31-CH-G2-SMT-TR
J2
1
SM08B-SRSS-TB
J3
1
SW_Push
SW1
1
SS14
D1
1
Red LED
D2
1
120R
FB1
1
3.9UH
3.9uH
L1
1
4.7UH
4.7uH
L2
3
10UF
10uF
C1, C5, C23
2
100NF
100nF
C2, C6
Show 17 more
QtyPartRefs
5
22UF
22uF
C3, C4, C7, C8, C14
6
.1uF
C9, C10, C11, C12, C15, C31
1
100UF
100uF
C13
7
100NF
100nF
C16, C17, C18, C19, C20, C21, C30
1
10NF
10nF
C22
2
1UF
1uF
C24, C25
2
14PF
14pF
C26, C27
2
2.2UF
2.2uF
C28, C29
2
27PF
27pF
C32, C33
3
1k
R1, R2, R3
2
75
R4, R5
2
100K
100k
R6, R8
3
10K
10k
R7, R11, R13
1
20K
20k
R12
1
1.5K
1.5k
R14
2
5.1K
5.1k
R15, R16
2
22
R19, R20

RPi Car.recovered.2026-05-17 124818 design files

The KiCad project lives in the k4i70/Flight-Controller repository on GitHub; these links point at the commit this page was built from.

RPi Car.recovered.2026-05-17 124818: common questions

What microcontroller does the RPi Car.recovered.2026-05-17 124818 use?

The RPi Car.recovered.2026-05-17 124818 is built around the STM32H743VITX, from the STM32 family.

How big is the RPi Car.recovered.2026-05-17 124818 PCB?

The RPi Car.recovered.2026-05-17 124818 measures 36.5 × 36.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RPi Car.recovered.2026-05-17 124818?

67 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RPi Car.recovered.2026-05-17 124818 design files?

From the k4i70/Flight-Controller repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the RPi Car.recovered.2026-05-17 124818 design in my own project?

The repository has no license, so all rights stay with k4i70. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RPi Car.recovered.2026-05-17 124818 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Flight-Controller

Similar boards