Hub

kanisakhpara-devs·holographic-hullabaloo·pcb/hub/hub.kicad_pcb

Hub PCB layout, top view — open source ESP32 board by kanisakhpara-devs

About the Hub PCB

Hub is an open source ESP32 PCB design by kanisakhpara-devs, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 77.2 mm, with 76 components from 33 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the BQ24073RGTR, TPS61088RHLR, AMS1117-3.3, 74AHCT245APWJ and DRV5023FAQDBZR. By type, the board carries 30 resistors, 24 capacitors, 6 ICs, 4 connectors, 4 diodes and 3 transistors.

It belongs with the audio, displays & leds and power & battery designs in this gallery.

From the project

A POV holographic AI assistant desk viewer. Largely in dev phase for now, open sourced for the 'Fallen' event by Hackclub. Feel free to check it out, download it, or contact me with errors or discrepancies found!

I understand your possibly dire confusion, so I'll try my best to explain it in the simplest way possible. Have you ever seen those LED fans which are all over Insta? They spin, to create an image.

The problem, however with those, is that they can only be viewed from one side, and properly from only one angle. Instead of engineering the solution, they are simply stuck on your wall, so it is only possible to view it from that exact point. Sometimes the best solutions are the most simple ones. Not in this case.

Hub, from the project README
From the project README

Main components on the Hub

Hub bill of materials (BOM)

76 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ24073RGTR
TI(德州仪器)
U1
1
TPS61088RHLR
TI(德州仪器)
U2
1
AMS1117-3.3
Advanced Monolithic Systems
U3
1
ESP32-S3-WROOM-1-N8
ESPRESSIF(乐鑫)
U4
1
74AHCT245APWJ
Nexperia(安世)
U5
1
DRV5023FAQDBZR
TI(德州仪器)
U6
2
AO3401A
AOS
Q1, Q2
1
2N7002
CJ(江苏长电/长晶)
Q3
1
S2B-PH-SM4-TB(LF)(SN)
S2B-PH-SM4-TB
JST
CN1
1
CONN_01X02
Conn_01x02
J1
2
CONN_01X06
Conn_01x06
J2, J3
1
MSK12C02
SHOU HAN(首韩)
SW1
2
TS-1187A-B-A-B
XKB Connection(中国星坤)
SW2, SW3
1
TYPE-C 16PIN 2MD(073)
TYPE-C 16PIN 2MD
SHOU HAN(首韩)
USB1
1
USBLC6-2SC6
ST(意法半导体)
D1
2
SS34
SS34_C8678
MDD(辰达半导体)
D2, D3
1
LED
D4
1
SWPA8040S2R2MT
Sunlord(顺络)
L1
8
100NF
100nF
C1, C6, C9, C11, C18, C21, C23, C24
9
22UF
22uF
C2, C4, C7, C8, C13, C14, C15, C17 +1
Show 13 more
QtyPartRefs
2
1UF
1uF
C3, C22
4
10UF
10uF
C5, C10, C16, C19
1
10NF
10nF
C12
2
5.1K
5.1k
R1, R2
1
1.1K
1.1k
R3
7
100K
100k
R4, R9, R10, R11, R16, R17, R18
7
10K
10k
R5, R6, R8, R14, R19, R20, R30
1
1.18K
1.18k
R7
1
330K
330k
R12
1
267K
267k
R13
1
316K
316k
R15
1
1k
R21
8
33
R22, R23, R24, R25, R26, R27, R28, R29

Hub design files

The KiCad project lives in the kanisakhpara-devs/holographic-hullabaloo repository on GitHub; these links point at the commit this page was built from.

Hub: common questions

What microcontroller does the Hub use?

The Hub is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.

How big is the Hub PCB?

The Hub measures 80 × 77.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hub?

76 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hub design files?

From the kanisakhpara-devs/holographic-hullabaloo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hub design in my own project?

Yes, under the terms of its MIT license, which kanisakhpara-devs chose for the repository.

Can I test firmware for the Hub without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in holographic-hullabaloo

Similar boards