HardLabs

ArduinoEquipped

kaustubh850·ArduinoEquipped·Arduino Uno IMU + BMP280 + 3.3V I2C/Arduino Uno SMD.kicad_pcb

ArduinoEquipped PCB layout, top view — open source AVR/Arduino board by kaustubh850

About the ArduinoEquipped PCB

ArduinoEquipped is an open source AVR/Arduino PCB design by kaustubh850, published on GitHub. It is a 2-layer board measuring 69.8 × 53.3 mm, with 65 components from 40 distinct parts.

Its main chip is the ATMEGA16U2-MU, from the AVR/Arduino family. Other key parts include the NCP1117-5.0_SOT223, LP2985-3.3, ATMEGA328P-MU, LMV358IDGKR and MPU-6050. By type, the board carries 19 capacitors, 12 resistors, 10 connectors, 8 ICs, 7 diodes and 2 crystals.

From the project

A Repo wit Arduino Uno Compatible Boards with on-board Addons.

Below are the screenshots of this board from KiCad's 3D board viewer.

Main components on the ArduinoEquipped

NCP1117-5.0_SOT223LP2985-3.3ATMEGA16U2-MUATMEGA328P-MULMV358IDGKRMPU-6050TXS0104EDBMP280

ArduinoEquipped bill of materials (BOM)

65 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NCP1117-5.0_SOT223
U1
1
LP2985-3.3
U2
1
ATMEGA16U2-MU
U3
1
ATMEGA328P-MU
U4
1
LMV358IDGKR
U5
1
MPU-6050
U6
1
TXS0104ED
U7
1
BMP280
U8
1
FDN340P
Q1
1
CSTNE16M0V530000R0
Y1
1
LFXTAL003240BULK
Y2
2
M20-9980345
J1, J3
1
M20-9980245
J2
1
PPTC101LFBN-RC
J4
2
PPTC081LFBN-RC
J5, J7
1
PPTC061LFBN-RC
J6
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J8
1
PJ-102AH
J9
1
CONN_01X02_PIN
Conn_01x02_Pin
J11
1
MF-MSMF050-2
F2
Show 20 more
QtyPartRefs
1
TS06-667-30-BK-100-G-SMT
TS06-667-30-BK-100-G-SMT-TR
S1
2
5pF@1MHz
Z1, Z2
1
CGRB307-G
D1
2
CD1206-S01575
D2, D3
3
YELLOW
D4, D5, D6
1
GREEN
D7
1
1kΩ@100MHz
FB1
1
10UH
10uH
FB2
2
47U
47u
C1, C2
7
100N
100n
C3, C4, C6, C7, C8, C9, C12
2
1u
C5, C10
2
22P
22p
C11, C13
1
2.2NF
2.2nF
C14
5
100NF
100nF
C15, C16, C17, C18, C19
2
1M
R1, R2
2
5K1
5k1
R3, R4
4
4.7K
4.7k
R5, R6, R7, R8
1
10K
10k
RN1
2
1k
RN2, RN4
1
22R
RN3

ArduinoEquipped design files

The KiCad project lives in the kaustubh850/ArduinoEquipped repository on GitHub; these links point at the commit this page was built from.

ArduinoEquipped: common questions

What microcontroller does the ArduinoEquipped use?

The ArduinoEquipped is built around the ATMEGA16U2-MU, from the AVR/Arduino family.

How big is the ArduinoEquipped PCB?

The ArduinoEquipped measures 69.8 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArduinoEquipped?

65 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ArduinoEquipped design files?

From the kaustubh850/ArduinoEquipped repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ArduinoEquipped design in my own project?

The repository has no license, so all rights stay with kaustubh850. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ArduinoEquipped without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards