12 open source boards using the ATMEGA16U2-MU

Real designs built with the ATMEGA16U2-MU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the ATMEGA16U2-MU

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ATMEGA16U2-MU connects to, and the resistors, capacitors and other passives placed on it.

  • The XTAL1 pin has a capacitor to GND on 9 of 9 designs, most often 22 pF.
  • The XTAL1 pin has a crystal on 9 of 9 designs, most often 16 MHz.
  • The PC0 pin has a capacitor to GND on 9 of 9 designs, most often 22 pF.
  • The PC0 pin has a crystal on 9 of 9 designs, most often 16 MHz.
XTAL1pin 1Connected to: Signal 100%
  • Capacitor to GND on 100% · 22 pF (9)
  • Crystal on 100% · 16 MHz (5)
  • Series resistor on 67% · 1 MΩ (6)
PC0pin 2Connected to: Signal 100%
  • Capacitor to GND on 100% · 22 pF (9)
  • Crystal on 100% · 16 MHz (5)
  • Series resistor on 67% · 1 MΩ (6)
GNDpin 3Connected to: GND 100%
VCCpin 4Connected to: 5V 100%
  • Decoupling capacitor on 44% · 100 nF (4), 10 nF (3), 10 µF (1)
PC2pin 5Connected to: Not connected 100%
PD0pin 6Connected to: Not connected 89%
PD1pin 7Connected to: Not connected 89%
PD2pin 8Connected to: Signal 100%
  • Series resistor on 89% · 1 kΩ (7), 10 kΩ (1)
PD3pin 9Connected to: Signal 100%
  • Series resistor on 89% · 1 kΩ (7), 10 kΩ (1)
PD6pin 12Connected to: Not connected 100%
PD7pin 13Connected to: Signal 89%
  • Series capacitor on 67% · 100 nF (6)
  • Pull-up to 5V on 44% · 1 kΩ (3), 10 kΩ (1)
PB0pin 14Connected to: Not connected 89%
PC7pin 22Connected to: Not connected 89%
PC6pin 23Connected to: Not connected 100%
PC1//RESETpin 24Connected to: A connector 56%
  • Series resistor on 67% · 10 kΩ (6)
  • Pull-up to 5V on 33% · 10 kΩ (3)
PC5pin 25Connected to: Not connected 100%
PC4pin 26Connected to: Not connected 100%
UCAPpin 27Connected to: Signal 100%
  • Capacitor to GND on 67% · 1 µF (5), 1 pF (1)
  • Series capacitor on 33% · 1 µF (3)
UGNDpin 28Connected to: GND 67% · a signal 33%
  • Series capacitor on 33% · 1 µF (3)
  • Crystal on 33%
D+pin 29Connected to: Signal 100%
  • Series resistor on 89% · 22 Ω (8)
D-pin 30Connected to: Signal 100%
  • Series resistor on 89% · 22 Ω (8)
UVCCpin 31Connected to: Signal 56% · 5V 33%
  • Capacitor to GND on 56% · 100 nF (4), 10 nF (3), 10 µF (1)
AVCCpin 32Connected to: 5V 100%
  • Decoupling capacitor on 67% · 100 nF (6), 10 nF (3), 10 µF (1)
EXPpin 33Connected to: GND 100%

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arduino Mega 2560 by sabogalc, Arduino MEGA 2560-Rev3 by bobc, Mainboard by MUNAKATA-EPC and Pico04 by HumphreyKwok.

The ATMEGA16U2-MU in open source designs

The gallery holds 12 open source boards using the ATMEGA16U2-MU from 10 GitHub repositories; a typical one measures about 79.6 × 53.3 mm and carries around 60 components.

90% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Arduino Mega 2560 by sabogalc.

Microcontrollers on boards using the ATMEGA16U2-MU

What boards using the ATMEGA16U2-MU are built for

ATMEGA16U2-MU: common questions

Where can I find a ATMEGA16U2-MU reference design?

Each of the 12 boards on this page is a real design using the ATMEGA16U2-MU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATMEGA16U2-MU XTAL1 pin connected?

The XTAL1 pin has a capacitor to GND on 9 of 9 designs, most often 22 pF. Counted from the KiCad layouts of 9 open source designs using the ATMEGA16U2-MU.

How is the ATMEGA16U2-MU PC0 pin connected?

The PC0 pin has a capacitor to GND on 9 of 9 designs, most often 22 pF. Counted from the KiCad layouts of 9 open source designs using the ATMEGA16U2-MU.

What resistor goes on the ATMEGA16U2-MU PD2 pin?

The PD2 pin has a series resistor on 8 of 9 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the ATMEGA16U2-MU.

What parts are used alongside the ATMEGA16U2-MU?

The LMV358IDGKR, ATMEGA2560-16AU, LP2985-3.3, NCP1117-5.0_SOT223 and ATmega328P-PU appear in the most repositories here.

Which microcontrollers do boards using the ATMEGA16U2-MU use?

Most are built on AVR/Arduino (12).

How big is a typical board using the ATMEGA16U2-MU?

The median is 79.6 × 53.3 mm, and 90% are two-layer designs.

What is the most popular open source board using the ATMEGA16U2-MU?

By GitHub stars, Arduino Mega 2560 by sabogalc, with 93 stars.

Can I simulate one of these boards using the ATMEGA16U2-MU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part