6 open source boards using the TXS0104ED

Real designs built with the TXS0104ED, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TXS0104ED

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TXS0104ED connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
  • The VCCA pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 1 µF).
  • The OE pin has a pull-up to 5V on 3 of 6 designs, most often 10 kΩ.
  • The B4 pin is tied to GND on 3 of 5 designs (a signal on 2).
VCCApin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 50% · 100 nF (5), 1 µF (1)
NCpin 6, 9Connected to: Not connected 100%
GNDpin 7Connected to: GND 100%
OEpin 8Connected to: 1.8V 50% · a signal 50%
  • Pull-up to 5V on 50% · 10 kΩ (3)
B4pin 10Connected to: GND 60% · a signal 40%
B1pin 13Connected to: A connector 83%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
VCCBpin 14Connected to: 5V 100%
  • Decoupling capacitor on 83% · 100 nF (4), 10 µF (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include A500-USB-Keyboard-Adapter-RP2040 by wiretap-retro, A2000-USB-Keyboard-Adapter-RP2040 by wiretap-retro, A500-USB-Keyboard-Adapter-JLC by wiretap-retro and ESP32 Offline GPS MAPS by uzzambutt.

The TXS0104ED in open source designs

The gallery holds 6 open source boards using the TXS0104ED from 6 GitHub repositories; a typical one measures about 55.1 × 50.8 mm and carries around 52 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is A500-USB-Keyboard-Adapter-RP2040 by wiretap-retro.

Parts used alongside the TXS0104ED

Microcontrollers on boards using the TXS0104ED

What boards using the TXS0104ED are built for

TXS0104ED: common questions

Where can I find a TXS0104ED reference design?

Each of the 6 boards on this page is a real design using the TXS0104ED. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXS0104ED VCCB pin?

The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TXS0104ED.

What decoupling capacitors do designs use on the TXS0104ED VCCA pin?

The VCCA pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the TXS0104ED.

What pull-up resistor is used on the TXS0104ED OE pin?

The OE pin has a pull-up to 5V on 3 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the TXS0104ED.

Which microcontrollers do boards using the TXS0104ED use?

Most are built on RP2040/RP2350 (3), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the TXS0104ED?

The median is 55.1 × 50.8 mm, and 67% are two-layer designs.

What is the most popular open source board using the TXS0104ED?

By GitHub stars, A500-USB-Keyboard-Adapter-RP2040 by wiretap-retro, with 17 stars.

Can I simulate one of these boards using the TXS0104ED before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part