HardLabs

FT600 RP2040

kelu124·oshmri·hardware/13.FT600/v0.4/FT600_RP2040.kicad_pcb

FT600 RP2040 PCB layout, top view — open source RP2040/RP2350 board by kelu124

About the FT600 RP2040 PCB

FT600 RP2040 is an open source RP2040/RP2350 PCB design by kelu124, published on GitHub. It is a 2-layer board measuring 85.5 × 54 mm, with 47 components from 24 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the FT600Q-B-T and ADC08100CIMTCX/NOPB(TSSOP-24). By type, the board carries 19 capacitors, 12 resistors, 8 connectors, 3 ICs, 3 inductors and 1 crystal.

From the project

OpenSourceHardware - going to MRI

1 dual PMOD, 12ADCbits+1clk + 1SPI (without MISO): based on the AD8331+ADC+DAC from https://github.com/kelu124/lit3rick/ (altium source in hardware folder) . Connector in: SMA, with MD0100 to protect. Possible elements: AD8331 ADC: AD9629BCPZ-65: 12bits, DAC: MCP4812-E/MS

Only logic through PMOD: positivepulse, negativepulse, damp. Expose remaining IOs on a 2.54" rail on the PMOD board (with 3.3V and GND as well) External GPIOs for +HV, -HV, GND. Internal : Positive: 3.3V -> 5V booster ; Negative: -5V rail for example (not mandatory if simpler exists)…

FT600 RP2040, from the project README
From the project README

Main components on the FT600 RP2040

PicoFT600Q-B-TADC08100CIMTCX/NOPB(TSSOP-24)

FT600 RP2040 bill of materials (BOM)

47 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Pico
U1
1
FT600Q-B-T
FTDI(飞特帝亚)
U2
1
ADC08100CIMTCX/NOPB(TSSOP-24)
U4
1
ABM7-30.000MHZ-D2Y-T
30Mhz
Y1
1
CONN_01X04
Conn_01x04
J1
3
22-23-2021
J2, J4, J6
2
613012243121
90122-0126
J3, J5
1
Conn_Coaxial
J7
1
ZX360D-B-10P(30)
ZX360D-B-10P_30_
J8
1
LED
D1
3
FerriteBead_Small
FB1, FB2, FB3
3
1UF
1uF
C1, C2, C19
10
100NF
100nF
C5, C8, C10, C11, C12, C16, C17, C18 +2
3
22UF
22uF
C6, C7, C9
2
18PF
18pF
C13, C15
1
47UF
4.7uF
C14
1
56
R1
3
110
R2, R3, R9
2
220
R4, R8
1
1.6K
R5
Show 4 more
QtyPartRefs
1
4.7K
R6
1
10K
R7
2
10K
R10, R11
1
470R
R12

FT600 RP2040 design files

The KiCad project lives in the kelu124/oshmri repository on GitHub; these links point at the commit this page was built from.

FT600 RP2040: common questions

What microcontroller does the FT600 RP2040 use?

The FT600 RP2040 is built around the Pico, from the RP2040/RP2350 family.

How big is the FT600 RP2040 PCB?

The FT600 RP2040 measures 85.5 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FT600 RP2040?

47 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FT600 RP2040 design files?

From the kelu124/oshmri repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FT600 RP2040 design in my own project?

The repository has no license, so all rights stay with kelu124. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FT600 RP2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in oshmri

Similar boards