Esp32-pcb control system

KerimAltuntecim·esp32-pcb-control-system

Esp32-pcb control system layout, top view — open source ESP32 board by KerimAltuntecim

About the Esp32-pcb control system

Esp32-pcb control system is an open source ESP32 PCB design by KerimAltuntecim, published on GitHub under the MIT license. It is a 2-layer board measuring 258.3 × 69.2 mm, with 38 components from 25 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the PC817, ULN2003, IR2103, MOC3022M and Pololu_Breakout_A4988. By type, the board carries 16 connectors, 10 resistors, 6 ICs, 2 transistors, 1 module and 1 buzzer.

It belongs with the sensors and robotics & motion designs in this gallery.

From the project

ESP32-C3 PCB control system with Nextion HMI, motor, sensor and power-driver interfaces.

English summary: ESP32-C3 based control PCB prototype with Nextion HMI, stepper, sensor, relay, triac and MOSFET interfaces. The repository documents the hardware and firmware structure; it is not a production-certified design.

ESP32-C3 tabanlı, Nextion HMI ekran üzerinden kontrol edilen çok işlevli bir PCB prototipi. Kart; sensör okuma, motor sürme, röle/triyak/MOSFET çıkışları ve kullanıcı arayüzü haberleşmesini tek bir donanım üzerinde birleştirir.

Main components on the Esp32-pcb control system

Esp32-pcb control system bill of materials (BOM)

38 components, 25 distinct parts.

QtyPartRefs
2
PC817
U1, U2
1
ULN2003
U3
1
IR2103
U4
1
ESP32-C3-WROOM-02
U6
1
MOC3022M
U7
1
Pololu_Breakout_A4988
A1
1
IRF540N
Q1
1
BT136-500
Q2
4
Screw_Terminal_01x02
J1, J2, J5, J6
2
Screw_Terminal_01x15
J3, J7
2
Screw_Terminal_01x04
J4, J14
2
lamba
J8, J11
2
şebeke
J9, J10
1
Screw_Terminal_01x03
J12
1
batarya
J13
2
Screw_Terminal_01x08
J15, J16
1
Buzzer
BZ1
1
SANYOU_SRD_Form_C
K1
1
1N4007
D1
5
670
R1, R4, R5, R6, R7
Show 5 more
QtyPartRefs
1
22
R2
1
10k
R3
1
220
R8
1
170k
R9
1
330k
R10

Esp32-pcb control system design files

The KiCad project lives in the KerimAltuntecim/esp32-pcb-control-system repository on GitHub; these links point at the commit this page was built from.

Esp32-pcb control system: common questions

What microcontroller does the Esp32-pcb control system use?

The Esp32-pcb control system is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Esp32-pcb control system?

The Esp32-pcb control system measures 258.3 × 69.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32-pcb control system?

38 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32-pcb control system design files?

From the KerimAltuntecim/esp32-pcb-control-system repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32-pcb control system design in my own project?

Yes, under the terms of its MIT license, which KerimAltuntecim chose for the repository.

Can I test firmware for the Esp32-pcb control system without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards