HardLabs

Manette

KimotoHoitsu·Voiture-guidee-par-main·PCB/Manette/Manette.kicad_pcb

Manette PCB layout, top view — open source ESP32 board by KimotoHoitsu

About the Manette PCB

Manette is an open source ESP32 PCB design by KimotoHoitsu, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 45 components from 26 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the ADXL343, LD1117S33TR_SOT223 and CH340C. By type, the board carries 13 resistors, 11 capacitors, 6 diodes, 4 ICs, 2 transistors and 2 connectors.

It belongs with the iot & wireless designs in this gallery.

From the project

Ce projet consiste à développer une voiture télécommandée via un contrôleur personnalisé utilisant la communication Bluetooth Low Energy (BLE) et un accéléromètre ADXL.

Main components on the Manette

ESP32-S3-WROOM-1ADXL343LD1117S33TR_SOT223CH340C

Manette bill of materials (BOM)

45 components, 26 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
ADXL343
U2
1
LD1117S33TR_SOT223
U3
1
CH340C
U4
2
BC817
Q1, Q2
1
SPST
J1
1
USB_B_Micro
J2
1
9V
BATT1
1
Conn_01x08
OLEDscreen1
1
SW_DIP_x01
SPST1
1
SW_SPST
SW1
1
1825910-6
SW_SPST
SW2
2
TestPoint
TP1, TP2
2
LED
D1, D6
3
~
D2, D3, D4
1
~
D5
3
10uF
C1, C7, C9
7
0.1uF
C2, C4, C5, C6, C8, C10, C11
1
1uF
C3
1
100K
R1
Show 6 more
QtyPartRefs
1
56K
R2
3
10k
R3, R4, R5
3
0(1%)
R6, R7, R11
2
5.1k(1%)
R8, R13
2
4.7k
R9, R10
1
10K(1%)
R12

Manette design files

The KiCad project lives in the KimotoHoitsu/Voiture-guidee-par-main repository on GitHub; these links point at the commit this page was built from.

Manette: common questions

What microcontroller does the Manette use?

The Manette is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Manette PCB?

The Manette measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Manette?

45 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Manette design files?

From the KimotoHoitsu/Voiture-guidee-par-main repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Manette design in my own project?

The repository has no license, so all rights stay with KimotoHoitsu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Manette without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Voiture-guidee-par-main

Similar boards