ArduH743-fc
KingFish233·ArduH743-fc
About the ArduH743-fc PCB
ArduH743-fc is an open source STM32 PCB design by KingFish233, published on GitHub. It is a 4-layer board measuring 38 × 38 mm, with 123 components from 63 distinct parts.
Its main chip is the STM32H743VIH6, from the STM32 family. Other key parts include the MP9943GQ-Z, RT9013-33GB, SPL06, BMI088 and W25Q128JVS. By type, the board carries 44 capacitors, 37 resistors, 14 diodes, 10 ICs, 10 connectors and 2 crystals.
From the project
一款H743飞控硬件,支持ardupilot。在NxtPX4的基础上修改
Main components on the ArduH743-fc
ArduH743-fc bill of materials (BOM)
123 components, 63 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MP9943GQ-Z | MP9943GQ-Z | U1, U4 |
| 2 | RT9013-33GB | RT9013-33GB | U2, U3 |
| 1 | STM32H743VIH6 | STM32H743VIHBGA100C80P10X10_800X800X110N | U11 |
| 1 | SPL06 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U13 |
| 2 | BMI088 | BMI088 | U14, U15 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U16 |
| 1 | SN74LVC1G86DCKR | DCK5 | U19 |
| 1 | AP40P05 | SOT-23 | Q1 |
| 1 | SG-210STF/ X1G004171002700 | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | Y1 |
| 1 | ABS07 (32.768kHZ) | LSE(2012) | Y2 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Small | J1 |
| 1 | DJIO3 | 1x06-1MP_P1.00mm_Horizontal | J2 |
| 1 | GPS | 1x06-1MP_P1.00mm_Horizontal | J3 |
| 1 | UART2 | 01x04_MP_sh1.0_Hori | J4 |
| 1 | ~ | 4p_pad_UART | J5 |
| 1 | ESC | 01x08_MP_sh1.0_Hori | J6 |
| 1 | Upper computer connector | 01x04_MP_sh1.0_Hori | J7 |
| 1 | ~ | 4p_pad | J8 |
| 1 | Micro_SD_Card | TF-SMD_TF-021B-H265 | J10 |
| 1 | ~ | 6P_PAD | J11 |
Show 43 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4P_PAD | 4p_pad | 4p_apd |
| 1 | 6P_PAD | 6P_PAD | 6P_PAD |
| 1 | TD-1183SN-1.5H(3x2.5) | 3x2.5PushButton | BOOT1 |
| 1 | PESD12VV1BL | PESD12VV1BL_315 | D1 |
| 2 | PESD5V0F1BL | PESD5V0F1BL | D2, D4 |
| 1 | SMF30CA(30V) | D_SOD-123F | D3 |
| 2 | DSS34(3A 500mV) | D_SOD-123F | D5, D7 |
| 1 | BZX584C9V1 | D_SOD-523 | D6 |
| 5 | LED_BLUE(0201) | LED_0201_0603Metric | D8, D9, D10, D11, D13 |
| 1 | LED_RED(0201) | LED_0201_0603Metric | D12 |
| 1 | LED_Green(0201) | LED_0201_0603Metric | D14 |
| 2 | 10uH(0420)(78438357100) | Inductor_0420 | L1, L2 |
| 4 | 22uF(0805 35V 20%) | C_0805_2012Metric | C1, C3, C12, C13 |
| 1 | 10uF(0603 35V 20%) | C_0603_1608Metric | C2 |
| 2 | 1uF(0402 35V 10%) | C_0402_1005Metric | C4, C8 |
| 3 | 1uF(0402 16V 10%) | C_0402_1005Metric | C5, C6, C9 |
| 13 | 100nF(0201 10V 10%) | C_0201_0603Metric | C7, C10, C16, C18, C19, C20, C33, C34 +5 |
| 1 | 100nF(0201 16V 10%) | C_0201_0603Metric | C11 |
| 2 | 1uF(0402 10V 10%) | C_0402_1005Metric | C14, C15 |
| 2 | 100nF(0201 25V 10%) | C_0201_0603Metric | C17, C21 |
| 1 | 100nF(0201 10.0V 10%) | C_0201_0603Metric | C22 |
| 3 | 22uF(0603 16V) | C_0603_1608Metric | C23, C24, C26 |
| 2 | 2.2uF(0402 6.3V 10%) | C_0402_1005Metric | C27, C28 |
| 1 | 4.7uF(0402 10V) | C_0402_1005Metric | C29 |
| 1 | 15pF(0201 10V) | C_0201_0603Metric | C30 |
| 1 | 100nF(0201 6.3V) | C_0201_0603Metric | C31 |
| 1 | 1uF(0201 6.3V) | C_0201_0603Metric | C32 |
| 2 | 12.0pF(0201 10V) | C_0201_0603Metric | C35, C36 |
| 4 | 100.0nF(0201 10V) | C_0201_0603Metric | C41, C42, C44, C45 |
| 2 | 5.1kR(0201) | R_0201_0603Metric | R1, R2 |
| 2 | 1MR(0402 50V) | R_0402_1005Metric | R3, R5 |
| 2 | 100kR(0201 25V) | R_0201_0603Metric | R4, R6 |
| 1 | 100kR(0201 50V) | R_0201_0603Metric | R7 |
| 2 | 20R(0201 25V) | R_0201_0603Metric | R8, R10 |
| 2 | 51kR(0201 25V) | R_0201_0603Metric | R9, R12 |
| 1 | 7.68kR(0201 25V) | R_0201_0603Metric | R11 |
| 2 | 41.2kR(0201 25V) | R_0201_0603Metric | R13, R17 |
| 1 | 200.0kR(0201 50V) | R_0201_0603Metric | R14 |
| 1 | 22.0kR(0201 50V) | R_0201_0603Metric | R15 |
| 1 | 2.90k-4.02kR(0201 25V) / 3k for 12V | R_0201_0603Metric | R16 |
| 12 | 10kR(0201) | R_0201_0603Metric | R18, R19, R20, R23, R27, R28, R31, R32 +4 |
| 1 | 20kR(0201 9V) | R_0201_0603Metric | R21 |
| 7 | 10.0kR(0201) | R_0201_0603Metric | R24, R25, R26, R29, R30, R36, R37 |
ArduH743-fc design files
The KiCad project lives in the KingFish233/ArduH743-fc repository on GitHub; these links point at the commit this page was built from.
- LayoutNxtPX4.kicad_pcb
- SchematicNxtPX4.kicad_sch
- BOMproduction/bom.csv
ArduH743-fc: common questions
What microcontroller does the ArduH743-fc use?
The ArduH743-fc is built around the STM32H743VIH6, from the STM32 family.
How big is the ArduH743-fc PCB?
The ArduH743-fc measures 38 × 38 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ArduH743-fc?
123 components, from 63 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ArduH743-fc design files?
From the KingFish233/ArduH743-fc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ArduH743-fc design in my own project?
The repository has no license, so all rights stay with KingFish233. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ArduH743-fc without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k