Camera project

kitnol·Camera_project·PCB/Wear Camera/Wear Camera.kicad_pcb

Camera project PCB layout, top view — open source ESP32 board by kitnol

About the Camera project PCB

Camera project is an open source ESP32 PCB design by kitnol, published on GitHub. It is a 4-layer board measuring 70.9 × 70.1 mm, with 70 components from 35 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP2111H-3.3TRG1, DS3231MZ, ADPL40502AUJZ-1.5-R7, ADPL40502AUJZ-2.8-R7 and TLV74328PDBVR. By type, the board carries 32 resistors, 20 capacitors, 9 ICs, 3 connectors, 3 diodes and 2 switches.

It belongs with the usb & debug tools designs in this gallery.

From the project

(See the README.md file in the upper level 'examples' directory for more information about examples.)

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example illustrates the usage of the REPL (Read-Eval-Print Loop) APIs of the Console Component to create an interactive shell on the ESP chip. The interactive shell running on the ESP chip can then be controlled/interacted with over a serial interface. This example supports UART and USB interfaces.

Main components on the Camera project

AP2111H-3.3TRG1ESP32-S3-WROOM-1DS3231MZADPL40502AUJZ-1.5-R7ADPL40502AUJZ-2.8-R7TLV74328PDBVRMolex 217179-0001USBLC6-2SC6BQ24074RGT

Camera project bill of materials (BOM)

70 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2111H-3.3TRG1
U1
1
ESP32-S3-WROOM-1
U2
1
DS3231MZ
U3
1
ADPL40502AUJZ-1.5-R7
LSM6DSM
U4
1
ADPL40502AUJZ-2.8-R7
LP5907MFX-1.5
U5
1
TLV74328PDBVR
U6
1
Molex 217179-0001
U9
1
USBLC6-2SC6
U10
1
BQ24074RGT
U11
1
FFC2B35-24-T
XF2M-2415-1A BY OMZ
J2
1
Molex 5033981892
J3
1
Conn_01x03_Pin
J4
1
C238097
BT1
2
C913778
S1, S2
2
150060GS55040
16-213/BHC-AN1P2/3T
D2, D15
1
150060RS55040
16-213SURC/S530-A4/TR8
D16
4
100N
100n
C1, C5, C6, C12
1
10U
10u
C2
6
1u
C3, C9, C10, C11, C15, C22
4
4.7U
4.7u
C4, C7, C8, C23
Show 15 more
QtyPartRefs
2
100n
C13, C14
3
10U
10u
C26, C27, C28
6
10K
10k
R1, R7, R11, R18, R19, R21
6
47K
10k
R2, R3, R4, R5, R6, R29
3
47K
3.3k
R8, R9, R10
3
150R
R12, R13, R15
2
3.3k
R14, R30
3
100K
100k
R16, R17, R23
1
20K
20k
R20
1
24.9K
24.9k
R22
2
5.1K
5.1k
R24, R25
1
750
R26
1
1.62K
1.62k
R27
1
49.9K
49.9k
R28
2
10k
R31, R32

Camera project design files

The KiCad project lives in the kitnol/Camera_project repository on GitHub; these links point at the commit this page was built from.

Camera project: common questions

What microcontroller does the Camera project use?

The Camera project is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Camera project PCB?

The Camera project measures 70.9 × 70.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Camera project?

70 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Camera project design files?

From the kitnol/Camera_project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Camera project design in my own project?

The repository has no license, so all rights stay with kitnol. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Camera project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards