Esp32 drone controller

kstken0210·ESP_Drone·esp32_drone_controller/esp32_drone_controller.kicad_pcb

Esp32 drone controller PCB layout, top view — open source ESP32 board by kstken0210

About the Esp32 drone controller PCB

Esp32 drone controller is an open source ESP32 PCB design by kstken0210, published on GitHub. It is a 2-layer board measuring 110 × 60.5 mm, with 85 components from 37 distinct parts.

Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the USBLC6-2SC6, MT3608, AP2112K-3.3, LTC4054 and AMS1117-3.3. By type, the board carries 30 resistors, 24 capacitors, 9 ICs, 8 switches, 7 connectors and 5 diodes.

It belongs with the iot & wireless and robotics & motion designs in this gallery.

From the project

以 ESP32-S3 為核心的四軸無人機專案,包含 4 層飛控板、手把式遙控器電路板,以及以 PlatformIO 建置的韌體。

以 ESP32-S3 為核心的四軸無人機專案,包含 4 層飛控板、手把式遙控器電路板,以及以 PlatformIO 建置的韌體。

感測器型號來自 platformio.ini 的 libdeps`;實際焊接型號、I2C 位址與腳位請以 PCB 和 BOM 為準。

- esp32drone4layerVersion/ — 飛控主板,4 層板。內含 KiCad 原理圖、PCB、netlist、CAM 子圖與 ESPdronegerber/。 - esp32dronecontroller/ — 手把式遙控器板。內含 KiCad 原理圖、PCB、netlist、自訂 touchpad.pretty 封裝與 controllergerber/。 - Image/ — 實板照片。

用 KiCad 開啟各目錄下的 .kicadpro 即可編輯;gerber/` 內是可直接送廠的 Gerber/鑽孔檔。

Esp32 drone controller, from the project README
From the project README

Main components on the Esp32 drone controller

Esp32 drone controller bill of materials (BOM)

85 components, 37 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1U-N16R8
U1
1
USBLC6-2SC6
U2
1
MT3608
U3
1
AP2112K-3.3
U4
1
LTC4054
U5
1
AMS1117-3.3
U6
2
AT42QT1011-TSHR
U7, U8
1
AO3404
U11
1
USB_C_Receptacle_USB2.0_14P
J1
1
Conn_01x02_Pin
J2
2
Conn_01x01_Pin
J3, J4
2
Conn_01x05
J5, J7
1
OLED
J6
1
Fuse
F1
2
SW_DPST_x2
SW1, SW2
6
SW_Push
SW3, SW4, SW5, SW6, SW7, SW8
1
D_Schottky
D1
3
LED
D2, D8, D9
1
SMAJ5.0A
D10
1
4.7uH
L2
Show 17 more
QtyPartRefs
4
1uF
C1, C14, C18, C23
2
8.2nF
C2, C7
10
0.1uF
C3, C6, C11, C20, C22, C24, C25, C26 +2
4
22uF
C4, C5, C17, C21
4
10uF
C8, C15, C16, C19
2
10k
R1, R2
4
4.7k
R3, R4, R6, R7
1
100k
R5
2
5.1k
R8, R9
1
200k
R10
5
110k
R11, R13, R17, R19, R28
4
220k
R12, R14, R18, R20
2
220ohm
R15, R16
6
1k
R21, R22, R23, R24, R25, R26
1
15k
R27
1
2.8k
R37
1
330R
R38

Esp32 drone controller design files

The KiCad project lives in the kstken0210/ESP_Drone repository on GitHub; these links point at the commit this page was built from.

Esp32 drone controller: common questions

What microcontroller does the Esp32 drone controller use?

The Esp32 drone controller is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.

How big is the Esp32 drone controller PCB?

The Esp32 drone controller measures 110 × 60.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32 drone controller?

85 components, from 37 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32 drone controller design files?

From the kstken0210/ESP_Drone repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32 drone controller design in my own project?

The repository has no license, so all rights stay with kstken0210. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32 drone controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESP_Drone

Similar boards