Esp32 drone 4layerVersion
kstken0210·ESP_Drone·esp32_drone_4layerVersion/esp32_drone_4layerVersion.kicad_pcb
About the Esp32 drone 4layerVersion PCB
Esp32 drone 4layerVersion is an open source ESP32 PCB design by kstken0210, published on GitHub. It is a 4-layer board measuring 64 × 64 mm, with 97 components from 45 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the USBLC6-2SC6, MT3608, MPU-6050, LTC4054 and AMS1117-3.3. By type, the board carries 32 capacitors, 30 resistors, 15 ICs, 9 diodes, 4 modules and 2 connectors.
It belongs with the iot & wireless and robotics & motion designs in this gallery.
From the project
以 ESP32-S3 為核心的四軸無人機專案,包含 4 層飛控板、手把式遙控器電路板,以及以 PlatformIO 建置的韌體。
以 ESP32-S3 為核心的四軸無人機專案,包含 4 層飛控板、手把式遙控器電路板,以及以 PlatformIO 建置的韌體。
感測器型號來自 platformio.ini 的 libdeps`;實際焊接型號、I2C 位址與腳位請以 PCB 和 BOM 為準。
- esp32drone4layerVersion/ — 飛控主板,4 層板。內含 KiCad 原理圖、PCB、netlist、CAM 子圖與 ESPdronegerber/。 - esp32dronecontroller/ — 手把式遙控器板。內含 KiCad 原理圖、PCB、netlist、自訂 touchpad.pretty 封裝與 controllergerber/。 - Image/ — 實板照片。
用 KiCad 開啟各目錄下的 .kicadpro 即可編輯;gerber/` 內是可直接送廠的 Gerber/鑽孔檔。

Main components on the Esp32 drone 4layerVersion
Esp32 drone 4layerVersion bill of materials (BOM)
97 components, 45 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U-N16R8 | XCVR_ESP32-S3-WROOM-1U-N16R8 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | LTC4054 | SOT23-5L | U5 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U6 |
| 1 | AMS1117-3.3/-1.2 | SOT-89-3 | U7 |
| 1 | BMP388 | XDCR_BMP388 | U8 |
| 1 | AMS1117 | SOT-89-3 | U9 |
| 1 | AMS1117-3.3 | SOT-89-3 | U10 |
| 1 | AO3404 | SOT23-3 | U11 |
| 4 | AO3400 | SOT23 | U12, U13, U14, U15 |
| 4 | Motor_DC | Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | M1, M2, M3, M4 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | OV2640 | OV2640 | CAM1 |
| 1 | Fuse | Fuse_1206_3216Metric | F1 |
| 2 | SW_SPST | SW_SPST_TS-1088-xR025 | SW4, SW5 |
| 5 | D_Schottky | D_SOD-123 | D1, D3, D6, D7, D11 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D8, D9 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SMAJ5.0A | D_SOD-123F | D10 |
| 1 | 4.7uH | L_Sunlord_SWPA4020S | L2 |
| 3 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C14 |
| 7 | 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C17, C21, C23, C24, C27 |
| 1 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 5 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C11, C20, C22 |
| 1 | 2.2nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 9 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C13, C15, C16, C18, C19, C25, C26 +1 |
| 1 | 2.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 5 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28, C29, C30, C31, C35 |
| 7 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R10, R12, R14, R18, R23 |
| 2 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 4 | 100Ω | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R11, R13, R17 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 220ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 2 | 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22 |
| 3 | 22R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24, R25, R26 |
| 1 | 15k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 110k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 1 | 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 2k->2.85k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R37 |
| 1 | 330R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38 |
| 1 | 220R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R41 |
| 1 | 270R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R42 |
Esp32 drone 4layerVersion design files
The KiCad project lives in the kstken0210/ESP_Drone repository on GitHub; these links point at the commit this page was built from.
Esp32 drone 4layerVersion: common questions
What microcontroller does the Esp32 drone 4layerVersion use?
The Esp32 drone 4layerVersion is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the Esp32 drone 4layerVersion PCB?
The Esp32 drone 4layerVersion measures 64 × 64 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32 drone 4layerVersion?
97 components, from 45 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32 drone 4layerVersion design files?
From the kstken0210/ESP_Drone repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32 drone 4layerVersion design in my own project?
The repository has no license, so all rights stay with kstken0210. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32 drone 4layerVersion without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ESP_Drone
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k