Z80 IOB
kuninet·Z80_IOB·KiCAD/Z80-8251-PPI.kicad_pcb
About the Z80 IOB PCB
Z80 IOB is an open source PCB design by kuninet, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 74.9 mm, with 34 components from 24 distinct parts.
Other key parts include the 74LS139, 8251, 8255, 74HC4060 and 8259. By type, the board carries 10 capacitors, 8 connectors, 6 ICs, 6 resistors, 1 transistor and 1 crystal.
It belongs with the retro computing designs in this gallery.
From the project
[KZ80-IOB] Z80マイコン用I/Oボードを作る
- SBC8080ルーズキットバスにつながるI/Oボードです。 - Z80 CPUボード(KZ80-CPUB)、SBC8080、SBC8085と組み合わせた稼働を確認しています。 - 8255パラレルI/O LSIを搭載しています。(Lチカに最適) - 8251シリアルチップを搭載しています。 - 将来 ArduinoコネクタのFM音源シールドを搭載するためのコネクタを装備しています。(これ以外の使いみちはありませんが...)
※LibreOffice/OpenOfficeのcalcで開ける形式となっています。
- 本リポジトリのデータは MIT License のもとで公開します。LICENSE.txtを参照して下さい。
- 8251シリアルLSIのアドレスデコードをSBC8080 SUBボードと合わせる場合は、アドレスデコードジャンパ(J2)の1-2を短絡(I/Oアドレス:00h)してください。 - 8255パラレルI/O LSIのアドレスデコードジャンパ(J3)は 13-14を短絡(I/Oアドレス:C0h)が推奨です。
Main components on the Z80 IOB
Z80 IOB bill of materials (BOM)
34 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS139 | DIP-16_W7.62mm_Socket | U1 |
| 1 | 8251 | DIP-28_W15.24mm_Socket | U2 |
| 1 | 8255 | DIP-40_W15.24mm_Socket | U3 |
| 1 | 74HC4060 | DIP-16_W7.62mm_Socket | U4 |
| 1 | 8259 | DIP-28_W15.24mm_Socket | U5 |
| 1 | 8254 | DIP-24_W15.24mm_Socket | U6 |
| 1 | 2SC1815 | TO-92_Inline_Wide | Q1 |
| 1 | 19.6608MHz | HC-49V | Y1 |
| 1 | SBC8080 BUS | Pin_Header_Angled_2x20 | J1 |
| 1 | ADDR_JP | PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | IR JP | PinHeader_1x05_P2.54mm_Horizontal | J3 |
| 1 | 232C-CON | PinHeader_1x06_P2.54mm_Horizontal | J4 |
| 1 | CON-A | PinHeader_2x07_P2.54mm_Vertical | J5 |
| 1 | CON-B | PinHeader_2x07_P2.54mm_Vertical | J6 |
| 1 | SERIAL JP | PinHeader_2x04_P2.54mm_Vertical | J7 |
| 1 | SP JP | PinHeader_1x02_P2.54mm_Horizontal | J8 |
| 1 | A7_JP | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | 1S4 | D_DO-34_SOD68_P7.62mm_Horizontal | D1 |
| 3 | 22p | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C10 |
| 6 | 0.1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4, C5, C6, C8, C9 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10u | CP_Radial_D5.0mm_P2.50mm | C7 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 4 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R5, R6 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Z80 IOB design files
The KiCad project lives in the kuninet/Z80_IOB repository on GitHub; these links point at the commit this page was built from.
Z80 IOB: common questions
How big is the Z80 IOB PCB?
The Z80 IOB measures 100 × 74.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z80 IOB?
34 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Z80 IOB design files?
From the kuninet/Z80_IOB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Z80 IOB design in my own project?
Yes, under the terms of its MIT license, which kuninet chose for the repository.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k