7 open source boards using the 8259
Real designs built with the 8259, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Chameleon schematics
Seequa-Computer-Preservation
435 × 317.5 mm361 parts2LNo license3Tiny-8088
nkeck720
147.3 × 128.3 mm54 parts2LGPL-2.03Z80 IOB
kuninet
100 × 74.9 mm34 parts2LMIT2- schematic only · 31 parts
Pravetz-16
enaix
31 partsNo license0 8086
homebrew8088
216.4 × 106.7 mm42 parts2LGPL-3.0278088
homebrew8088
132 × 73.9 mm22 parts2LGPL-3.023880188
homebrew8088
143 × 73.9 mm18 parts2LGPL-3.0238
How designs wire the 8259
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 8259 connects to, and the resistors, capacitors and other passives placed on it.
- The CAS0 pin is left unconnected on 4 of 5 designs.
- The CAS1 pin is left unconnected on 4 of 5 designs.
- The CAS2 pin is left unconnected on 4 of 5 designs.
- The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CAS0pin 12 | Connected to: Not connected 80% · a signal 20% | — |
| CAS1pin 13 | Connected to: Not connected 80% · a signal 20% | — |
| GNDpin 14 | Connected to: GND 100% | — |
| CAS2pin 15 | Connected to: Not connected 80% · a signal 20% | — |
| SP/ENpin 16 | Connected to: Signal 60% · not connected 20% · VCC 20% |
|
| VCCpin 28 | Connected to: VCC 60% · a signal 40% |
|
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 80188 by homebrew8088, 8086 by homebrew8088, Tiny-8088 by nkeck720 and Chameleon schematics by Seequa-Computer-Preservation.
The 8259 in open source designs
The gallery holds 7 open source boards using the 8259 from 6 GitHub repositories; a typical one measures about 145.2 × 90.8 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is 8088 by homebrew8088.
Parts used alongside the 8259
What boards using the 8259 are built for
8259: common questions
Where can I find a 8259 reference design?
Each of the 7 boards on this page is a real design using the 8259. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 8259 CAS0 pin connected?
The CAS0 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 8259.
How is the 8259 CAS1 pin connected?
The CAS1 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 8259.
How is the 8259 CAS2 pin connected?
The CAS2 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 8259.
What parts are used alongside the 8259?
The 74LS245, 8284, 74LS04, 8088 and 8253 appear in the most repositories here.
How big is a typical board using the 8259?
The median is 145.2 × 90.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the 8259?
By GitHub stars, 8088 by homebrew8088, with 238 stars.
Can I simulate one of these boards using the 8259 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.