23 open source boards using the 8255
Real designs built with the 8255, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
PC-8001 SD
yanataka60
100 × 100 mm19 parts2LMIT28AVR/Arduino
MZ80K SD
yanataka60
100 × 100 mm21 parts2LMIT27AVR/Arduino
MSX SD
yanataka60
79 × 100 mm13 parts2LMIT19ESP8266
Stargate
leomanes
335 × 218.6 mm274 parts2LGPL-3.018AVR/Arduino
MZ2000 SD
yanataka60
100 × 100 mm26 parts2LMIT16AVR/Arduino
FM-7 SD
yanataka60
100 × 100 mm17 parts2LMIT14Main
ceteras
299.2 × 180 mm352 parts2LMIT11AVR/Arduino
PC-6001 SD
yanataka60
79 × 127 mm17 parts2LMIT7C128 ieee488 interface 8255
TMO2018
58.4 × 82.8 mm15 parts2LNo license7Userport expander
djtulan
64.3 × 98 mm10 parts2LNo license7AVR/Arduino
MZ-1500 SD
yanataka60
114.8 × 104.4 mm33 parts2LMIT6AVR/Arduino
MZ-700 SD
yanataka60
100 × 100 mm21 parts2LMIT6Z80 IOB
kuninet
100 × 74.9 mm34 parts2LMIT2AVR/Arduino
TK-80BS SD
yanataka60
142.5 × 78 mm19 parts2LMIT2AVR/Arduino
MZ-700 SD-NiseRamFile
yanataka60
77 × 145 mm25 parts2LMIT1Before hole repair
apws
160 × 100 mm62 parts2LNo license0Z80-computer v0
vaibhavvahbiav
133.8 × 140.8 mm47 parts10LMIT0AVR/Arduino
Mz-2000
yanataka60
115.8 × 142.8 mm25 parts2LMIT16Before tail cleanup
apws
160 × 100 mm62 parts2LNo license0ZX81 Centronics
BrettHallen
68.8 × 82.6 mm18 parts2LNo license5PDS PCISA
diyelectromusic
100 × 99.6 mm15 parts2LMIT1FirstZ80
apws
160 × 100 mm62 parts2LNo license0PPort
homebrew8088
104 × 73.9 mm20 parts2LGPL-3.0238
How designs wire the 8255
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the 8255 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 95% | — |
| VCCpin 26 | Connected to: 5V 95% | — |
38 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PPort by homebrew8088, PC-8001 SD by yanataka60, MZ80K SD by yanataka60 and MSX SD by yanataka60.
The 8255 in open source designs
The gallery holds 23 open source boards using the 8255 from 20 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 21 components.
96% are two-layer designs, the rest use four layers or more, and 74% carry an open source license.
The most starred is PPort by homebrew8088.
Parts used alongside the 8255
Microcontrollers on boards using the 8255
What boards using the 8255 are built for
8255: common questions
Where can I find a 8255 reference design?
Each of the 23 boards on this page is a real design using the 8255. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 8255?
The 74LS04, 74LS30, Arduino_Pro_Mini_5V, 2764 and 74LS10 appear in the most repositories here.
Which microcontrollers do boards using the 8255 use?
Most are built on AVR/Arduino (11) and ESP8266 (1).
How big is a typical board using the 8255?
The median is 100 × 100 mm, and 96% are two-layer designs.
What is the most popular open source board using the 8255?
By GitHub stars, PPort by homebrew8088, with 238 stars.
Can I simulate one of these boards using the 8255 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.