HardLabs

Power

Kushal-Sachdeva78·VVS-Ballers-RoboCup·RoboCup Internationals 2025-26/PCB/Power/Power_PCB.kicad_pcb

Power PCB layout, top view — open source board by Kushal-Sachdeva78
Simulate this board

About the Power PCB

Power is an open source PCB design by Kushal-Sachdeva78, published on GitHub under the MIT license. It is a 2-layer board measuring 125.5 × 70 mm, with 32 components from 13 distinct parts.

By type, the board carries 4 capacitors, 1 fuse and 1 switch.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

Autonomous RoboCupJunior Soccer (IR League) robots by Team VVS Ballers: 9th place at RoboCup 2026 in Incheon. Teensy 4.1 multi-board electronics, IR/line/ultrasonic sensing, OpenMV vision, 48 V solenoid kicker. Firmware, KiCad PCBs, Fusion 360 CAD.

KiCad sources, Gerbers, drill and job files for every board, plus human-readable wiring and ready-to-order fab packages.

The previous main board revision is archived in ../Legacy/PCB/Mainv1`.

Each board folder is a KiCad project — open the .kicadpro (the matching .kicadpcb and .kicadsch sit beside it). The loose .gbr / .drl / .gbrjob files are generated fabrication outputs; for ordering, prefer the zipped packages in Fabrication/. KiCad local-settings files (.kicadprl) and auto-backups are intentionally git-ignored.

Power bill of materials (BOM)

32 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
Conn_01x02
3.3V_Out1, 3.3V_Out2, 3.3V_Out3
1
IR
5V_Out1
1
Line
5V_Out2
1
Main_PCB
5V_Out3
1
US_PCB
5V_Out4
1
Camera
5V_Out5
5
Screw_Terminal_01x02
12_IN1, 12_Out1, 12_Out2, 12_Out3, 12_Out4
1
Conn_01x02
24V_Out1
1
Fuse
F1
1
SW_DIP_x01
SW1
12
Conn_01x01
Step_Down_IN_3.3V1, Step_Down_IN_3.3V_GND1, Step_Down_IN_5V1, Step_Down_IN_5V_GND1, Step_Down_OUT_3.3V1, Step_Down_OUT_3.3V_GND1, Step_Down_OUT_5V1, Step_Down_OUT_5V_GND1 +4
3
C
C1, C2, C4
1
C
C3

Power design files

The KiCad project lives in the Kushal-Sachdeva78/VVS-Ballers-RoboCup repository on GitHub; these links point at the commit this page was built from.

Power: common questions

How big is the Power PCB?

The Power measures 125.5 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power?

32 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Power design files?

From the Kushal-Sachdeva78/VVS-Ballers-RoboCup repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Power design in my own project?

Yes, under the terms of its MIT license, which Kushal-Sachdeva78 chose for the repository.

More boards in VVS-Ballers-RoboCup

Similar boards