Amp 1layer

lahirunirmalx·discrete-stereo-amp·kicad/amp/amp_1layer.kicad_pcb

Amp 1layer PCB layout, top view — open source board by lahirunirmalx

About the Amp 1layer PCB

Amp 1layer is an open source PCB design by lahirunirmalx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 194.3 × 100 mm, with 98 components from 33 distinct parts.

By type, the board carries 30 resistors, 16 capacitors, 12 transistors, 8 test points and 4 connectors.

It belongs with the audio designs in this gallery.

From the project

Hobby stereo class-AB amplifier (BC547/BD139/BD140), discrete 12 V supply and volume board: simulated, generated KiCad boards, docs. CC BY-NC-SA 4.0

A hobby / learning project: a two-channel 1 W class-AB amplifier built from BC547/BC557/BD139/BD140, its own transformer-fed discrete supply, and a volume board, all on one fab panel. It grew out of a review of a one-transistor "speaker in the collector" amp, which could not be fixed by changing values. Every number here comes from ngspice; no board has been built or measured yet (release 1.1 is a prototype design).

Amp 1layer, from the project README
From the project README

Amp 1layer bill of materials (BOM)

98 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
BC547
Q1001, Q1002, Q1006, Q2001, Q2002, Q2006
2
BC557
Q1003, Q2003
2
BD139
Q1004, Q2004
2
BD140
Q1005, Q2005
1
DC 12V IN
J1
1
IN L-G-R
J2
1
SPK L
J3
1
SPK R
J4
4
M2.5
H1, H2, H3, H4
22
wire link
JL1, JL2, JL3, JL4, JL5, JL6, JL7, JL8 +14
2
1k
RV100, RV200
1
+12V
TP1
1
GND
TP2
2
B1 5.9V
TP1001, TP2001
2
OUT 5.9V
TP1002, TP2002
2
E4 bias
TP1003, TP2003
3
1000u
C1, C10006, C20006
3
100n
C2, C10007, C20007
2
2.2u
C10001, C20001
2
47u
C10002, C20002
Show 13 more
QtyPartRefs
2
220u
C10003, C20003
2
100p
C10004, C20004
2
100u
C10005, C20005
6
47k
R10001, R10002, R10003, R20001, R20002, R20003
2
4.7k
R10004, R20004
2
10k
R10005, R20005
2
22k
R10006, R20006
4
1k
R10007, R10010, R20007, R20010
2
47
R10008, R20008
2
470
R10009, R20009
4
270
R10011, R10012, R20011, R20012
4
0.47
R10013, R10014, R20013, R20014
2
10
R10015, R20015

Amp 1layer design files

The KiCad project lives in the lahirunirmalx/discrete-stereo-amp repository on GitHub; these links point at the commit this page was built from.

Amp 1layer: common questions

How big is the Amp 1layer PCB?

The Amp 1layer measures 194.3 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Amp 1layer?

98 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Amp 1layer design files?

From the lahirunirmalx/discrete-stereo-amp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Amp 1layer design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in discrete-stereo-amp

Similar boards