Psu 1layer

lahirunirmalx·discrete-stereo-amp·kicad/psu/psu_1layer.kicad_pcb

Psu 1layer PCB layout, top view — open source board by lahirunirmalx

About the Psu 1layer PCB

Psu 1layer is an open source PCB design by lahirunirmalx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 117 × 65 mm, with 34 components from 25 distinct parts.

By type, the board carries 8 diodes, 5 connectors, 5 capacitors, 4 test points, 4 resistors and 3 transistors.

It belongs with the audio designs in this gallery.

From the project

Hobby stereo class-AB amplifier (BC547/BD139/BD140), discrete 12 V supply and volume board: simulated, generated KiCad boards, docs. CC BY-NC-SA 4.0

A hobby / learning project: a two-channel 1 W class-AB amplifier built from BC547/BC557/BD139/BD140, its own transformer-fed discrete supply, and a volume board, all on one fab panel. It grew out of a review of a one-transistor "speaker in the collector" amp, which could not be fixed by changing values. Every number here comes from ngspice; no board has been built or measured yet (release 1.1 is a prototype design).

Psu 1layer, from the project README
From the project README

Psu 1layer bill of materials (BOM)

34 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
BC547
Q1, Q3
1
TIP41C
Q2
1
AC IN 12-15V
J1
1
DC IN 12V
J2
1
DC OUT 1
J3
1
DC OUT 2
J4
1
LED REMOTE
J5
1
1A T 5x20
F1
4
M2.5
H1, H2, H3, H4
1
VRAW 14-19V
TP1
1
VZ 13V
TP2
1
VOUT 11.5V
TP3
1
GND
TP4
4
1N5401
D1, D2, D3, D4
1
13V 1W
D5
1
1N4007
D6
1
LED
D7
1
SB540
D8
2
2200u
C1, C2
1
100u
C3
Show 5 more
QtyPartRefs
1
220u
C4
1
100n
C5
1
4.7k
R1
2
1k
R2, R4
1
0.33 2W
R3

Psu 1layer design files

The KiCad project lives in the lahirunirmalx/discrete-stereo-amp repository on GitHub; these links point at the commit this page was built from.

Psu 1layer: common questions

How big is the Psu 1layer PCB?

The Psu 1layer measures 117 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Psu 1layer?

34 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Psu 1layer design files?

From the lahirunirmalx/discrete-stereo-amp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Psu 1layer design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in discrete-stereo-amp

Similar boards