Stereo panel

lahirunirmalx·discrete-stereo-amp·kicad/panel/stereo-panel.kicad_pcb

Stereo panel PCB layout, top view — open source board by lahirunirmalx

About the Stereo panel PCB

Stereo panel is an open source PCB design by lahirunirmalx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 144.1 × 144.1 mm, with 99 components from 43 distinct parts.

By type, the board carries 34 resistors, 19 capacitors, 15 transistors, 10 test points, 8 diodes and 5 connectors.

It belongs with the audio designs in this gallery.

From the project

Hobby stereo class-AB amplifier (BC547/BD139/BD140), discrete 12 V supply and volume board: simulated, generated KiCad boards, docs. CC BY-NC-SA 4.0

A hobby / learning project: a two-channel 1 W class-AB amplifier built from BC547/BC557/BD139/BD140, its own transformer-fed discrete supply, and a volume board, all on one fab panel. It grew out of a review of a one-transistor "speaker in the collector" amp, which could not be fixed by changing values. Every number here comes from ngspice; no board has been built or measured yet (release 1.1 is a prototype design).

Stereo panel, from the project README
From the project README

Stereo panel bill of materials (BOM)

99 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
8
BC547
Q1, Q3, Q1001, Q1002, Q1006, Q2001, Q2002, Q2006
1
TIP41C
Q2
2
BC557
Q1003, Q2003
2
BD139
Q1004, Q2004
2
BD140
Q1005, Q2005
1
AC IN 12-15V
J1
1
DC IN 12V
J2
1
LED IN
J3
1
DC OUT 2
J4
1
LED REMOTE
J5
1
1A T 5x20
F1
4
M2.5
H1, H2, H3, H4
1
10k log dual
RV1
2
1k
RV100, RV200
1
+12V
TP1
2
GND
TP2, TP4
1
VOUT 11.5V
TP3
2
B1 5.9V
TP1001, TP2001
2
OUT 5.9V
TP1002, TP2002
2
E4 bias
TP1003, TP2003
Show 23 more
QtyPartRefs
4
1N5401
D1, D2, D3, D4
1
13V 1W
D5
1
1N4007
D6
1
LED
D7
1
SB540
D8
3
1000u
C1, C10006, C20006
4
100n
C2, C5, C10007, C20007
3
100u
C3, C10005, C20005
3
220u
C4, C10003, C20003
2
2.2u
C10001, C20001
2
47u
C10002, C20002
2
100p
C10004, C20004
3
4.7k
R1, R10004, R20004
6
1k
R2, R4, R10007, R10010, R20007, R20010
1
0.33 2W
R3
6
47k
R10001, R10002, R10003, R20001, R20002, R20003
2
10k
R10005, R20005
2
22k
R10006, R20006
2
47
R10008, R20008
2
470
R10009, R20009
4
270
R10011, R10012, R20011, R20012
4
0.47
R10013, R10014, R20013, R20014
2
10
R10015, R20015

Stereo panel design files

The KiCad project lives in the lahirunirmalx/discrete-stereo-amp repository on GitHub; these links point at the commit this page was built from.

Stereo panel: common questions

How big is the Stereo panel PCB?

The Stereo panel measures 144.1 × 144.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stereo panel?

99 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stereo panel design files?

From the lahirunirmalx/discrete-stereo-amp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Stereo panel design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in discrete-stereo-amp

Similar boards