Vol 1layer

lahirunirmalx·discrete-stereo-amp·kicad/vol/vol_1layer.kicad_pcb

Vol 1layer PCB layout, top view — open source board by lahirunirmalx

About the Vol 1layer PCB

Vol 1layer is an open source PCB design by lahirunirmalx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 42 × 26 mm, with 6 components from 6 distinct parts.

By type, the board carries 3 connectors and 1 diode.

It belongs with the audio designs in this gallery.

From the project

Hobby stereo class-AB amplifier (BC547/BD139/BD140), discrete 12 V supply and volume board: simulated, generated KiCad boards, docs. CC BY-NC-SA 4.0

A hobby / learning project: a two-channel 1 W class-AB amplifier built from BC547/BC557/BD139/BD140, its own transformer-fed discrete supply, and a volume board, all on one fab panel. It grew out of a review of a one-transistor "speaker in the collector" amp, which could not be fixed by changing values. Every number here comes from ngspice; no board has been built or measured yet (release 1.1 is a prototype design).

Vol 1layer, from the project README
From the project README

Vol 1layer bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
IN L-G-R
J1
1
OUT L-G-R
J2
1
LED IN
J3
1
wire link
JL1
1
10k log dual
RV1
1
POWER LED
D1

Vol 1layer design files

The KiCad project lives in the lahirunirmalx/discrete-stereo-amp repository on GitHub; these links point at the commit this page was built from.

Vol 1layer: common questions

How big is the Vol 1layer PCB?

The Vol 1layer measures 42 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vol 1layer?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vol 1layer design files?

From the lahirunirmalx/discrete-stereo-amp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Vol 1layer design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in discrete-stereo-amp

Similar boards