Vol
lahirunirmalx·discrete-stereo-amp·kicad/vol/vol.kicad_pcb
About the Vol PCB
Vol is an open source PCB design by lahirunirmalx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 42 × 26 mm, with 5 components from 5 distinct parts.
By type, the board carries 3 connectors and 1 diode.
It belongs with the audio designs in this gallery.
From the project
Hobby stereo class-AB amplifier (BC547/BD139/BD140), discrete 12 V supply and volume board: simulated, generated KiCad boards, docs. CC BY-NC-SA 4.0
A hobby / learning project: a two-channel 1 W class-AB amplifier built from BC547/BC557/BD139/BD140, its own transformer-fed discrete supply, and a volume board, all on one fab panel. It grew out of a review of a one-transistor "speaker in the collector" amp, which could not be fixed by changing values. Every number here comes from ngspice; no board has been built or measured yet (release 1.1 is a prototype design).

Vol bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN L-G-R | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | OUT L-G-R | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | LED IN | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 10k log dual | Potentiometer_Alps_RK097_Dual_Horizontal | RV1 |
| 1 | POWER LED | LED_D3.0mm | D1 |
Vol design files
The KiCad project lives in the lahirunirmalx/discrete-stereo-amp repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/vol/vol.kicad_pcb
- Schematickicad/vol/vol.kicad_sch
- BOMkicad/vol/bom_vol.csv
Vol: common questions
How big is the Vol PCB?
The Vol measures 42 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vol?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Vol design files?
From the lahirunirmalx/discrete-stereo-amp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Vol design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in discrete-stereo-amp
Stereo panel
lahirunirmalx
144.1 × 144.1 mm99 parts2LCC-BY-NC-4.00Amp 1layer
lahirunirmalx
194.3 × 100 mm98 parts2LCC-BY-NC-4.00Amp
lahirunirmalx
134 × 71 mm76 parts2LCC-BY-NC-4.00Psu
lahirunirmalx
90 × 50 mm34 parts2LCC-BY-NC-4.00Psu 1layer
lahirunirmalx
117 × 65 mm34 parts2LCC-BY-NC-4.00Vol 1layer
lahirunirmalx
42 × 26 mm6 parts2LCC-BY-NC-4.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687