Autoroute probe
lakewoodphone·tesla-lin-chip·hardware/tesla-dual-lin-rev-a/build/autoroute-probe.kicad_pcb
About the Autoroute probe PCB
Autoroute probe is an open source ESP32 PCB design by lakewoodphone, published on GitHub. It is a 4-layer board measuring 100 × 60 mm, with 17 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U, from the ESP32 family. Other key parts include the TJA1021T car, TJA1021T wheel and LM5164DDA. By type, the board carries 4 ICs, 4 diodes, 2 inductors, 1 transistor, 1 connector and 1 fuse.
It belongs with the iot & wireless designs in this gallery.
From the project
Tesla LIN bus bench - XIAO ESP32-C3 + APGDT001 + TJA1021 passive LIN capture for Model 3/Y/X anti-nag research
Tesla LIN reverse-engineering and anti-nag chip project. Covers passive LIN capture, active frame injection, Model 3/Y/X steering wheel volume control, and the custom dual-LIN ESP32-S3 Rev A PCB (JLCPCB order).
Local path: C:\Users\ezabz\Code\tesla-lin-chip GitHub: https://github.com/lakewoodphone/tesla-lin-chip
Start with STARTHERE.md when resuming. It now points to the current Rev A ESP32-S3 dual-LIN Model 3 active anti-nag path. Older XIAO/APG discovery notes are preserved under docs/archive/legacy-xiao-2026-06-17/` and should be treated as historical evidence, not the active operating…
Main components on the Autoroute probe
Autoroute probe bill of materials (BOM)
17 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U | ESP32-S3-WROOM-1U | U1 |
| 1 | TJA1021T car | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TJA1021T wheel | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LM5164DDA | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U4 |
| 1 | AO4407A PFET | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 22uF 10V | C_1206_3216Metric | C_3V3 |
| 1 | 1812 PPTC | Fuse_1812_4532Metric | F1 |
| 2 | 0603 | R_0603_1608Metric | R_CC1, R_CC2 |
| 1 | DPDT ARM | SW_DPDT_CK_JS202011JCQN | SW1 |
| 1 | SMBJ24A | D_SMB | D1 |
| 1 | LIN_A ESD | D_SOD-323 | D2 |
| 1 | LIN_B ESD | D_SOD-323 | D3 |
| 1 | USB ESD | SOT-23-6 | D4 |
| 1 | 1206 ferrite | L_1206_3216Metric | FB1 |
| 1 | 10uH | L_Bourns_SRU5016_5.2x5.2mm | L1 |
Autoroute probe design files
The KiCad project lives in the lakewoodphone/tesla-lin-chip repository on GitHub; these links point at the commit this page was built from.
Autoroute probe: common questions
What microcontroller does the Autoroute probe use?
The Autoroute probe is built around the ESP32-S3-WROOM-1U, from the ESP32 family.
How big is the Autoroute probe PCB?
The Autoroute probe measures 100 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Autoroute probe?
17 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Autoroute probe design files?
From the lakewoodphone/tesla-lin-chip repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Autoroute probe design in my own project?
The repository has no license, so all rights stay with lakewoodphone. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Autoroute probe without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in tesla-lin-chip
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k