Tesla dual lin rev a routed
lakewoodphone·tesla-lin-chip·hardware/tesla-dual-lin-rev-a/build/tesla-dual-lin-rev-a-routed.kicad_pcb
About the Tesla dual lin rev a routed PCB
Tesla dual lin rev a routed is an open source ESP32 PCB design by lakewoodphone, published on GitHub. It is a 4-layer board measuring 100 × 60 mm, with 17 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U, from the ESP32 family. Other key parts include the TJA1021T car, TJA1021T wheel and LM5164DDA. By type, the board carries 4 ICs, 4 diodes, 2 inductors, 1 transistor, 1 connector and 1 fuse.
It belongs with the iot & wireless designs in this gallery.
From the project
Tesla LIN bus bench - XIAO ESP32-C3 + APGDT001 + TJA1021 passive LIN capture for Model 3/Y/X anti-nag research
Tesla LIN reverse-engineering and anti-nag chip project. Covers passive LIN capture, active frame injection, Model 3/Y/X steering wheel volume control, and the custom dual-LIN ESP32-S3 Rev A PCB (JLCPCB order).
Local path: C:\Users\ezabz\Code\tesla-lin-chip GitHub: https://github.com/lakewoodphone/tesla-lin-chip
Start with STARTHERE.md when resuming. It now points to the current Rev A ESP32-S3 dual-LIN Model 3 active anti-nag path. Older XIAO/APG discovery notes are preserved under docs/archive/legacy-xiao-2026-06-17/` and should be treated as historical evidence, not the active operating…
Main components on the Tesla dual lin rev a routed
Tesla dual lin rev a routed bill of materials (BOM)
17 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U | ESP32-S3-WROOM-1U | U1 |
| 1 | TJA1021T car | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TJA1021T wheel | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LM5164DDA | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U4 |
| 1 | AO4407A PFET | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 22uF 10V | C_1206_3216Metric | C_3V3 |
| 1 | 1812 PPTC | Fuse_1812_4532Metric | F1 |
| 2 | 0603 | R_0603_1608Metric | R_CC1, R_CC2 |
| 1 | DPDT ARM | SW_DPDT_CK_JS202011JCQN | SW1 |
| 1 | SMBJ24A | D_SMB | D1 |
| 1 | LIN_A ESD | D_SOD-323 | D2 |
| 1 | LIN_B ESD | D_SOD-323 | D3 |
| 1 | USB ESD | SOT-23-6 | D4 |
| 1 | 1206 ferrite | L_1206_3216Metric | FB1 |
| 1 | 10uH | L_Bourns_SRU5016_5.2x5.2mm | L1 |
Tesla dual lin rev a routed design files
The KiCad project lives in the lakewoodphone/tesla-lin-chip repository on GitHub; these links point at the commit this page was built from.
Tesla dual lin rev a routed: common questions
What microcontroller does the Tesla dual lin rev a routed use?
The Tesla dual lin rev a routed is built around the ESP32-S3-WROOM-1U, from the ESP32 family.
How big is the Tesla dual lin rev a routed PCB?
The Tesla dual lin rev a routed measures 100 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tesla dual lin rev a routed?
17 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tesla dual lin rev a routed design files?
From the lakewoodphone/tesla-lin-chip repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Tesla dual lin rev a routed design in my own project?
The repository has no license, so all rights stay with lakewoodphone. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tesla dual lin rev a routed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in tesla-lin-chip
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k