Tesla dual lin rev a

lakewoodphone·tesla-lin-chip·hardware/tesla-dual-lin-rev-a/kicad/tesla-dual-lin-rev-a.kicad_pcb

Tesla dual lin rev a PCB layout, top view — open source ESP32 board by lakewoodphone

About the Tesla dual lin rev a PCB

Tesla dual lin rev a is an open source ESP32 PCB design by lakewoodphone, published on GitHub. It is a 4-layer board measuring 100 × 56 mm, with 45 components from 22 distinct parts.

Its main chip is the ESP32-S3-WROOM-1U-N8R8, from the ESP32 family. Other key parts include the TJA1021T car, TJA1021T wheel and LM5164DDA. By type, the board carries 4 ICs, 4 diodes, 3 connectors, 2 inductors, 1 transistor and 1 fuse.

It belongs with the iot & wireless designs in this gallery.

From the project

Tesla LIN bus bench - XIAO ESP32-C3 + APGDT001 + TJA1021 passive LIN capture for Model 3/Y/X anti-nag research

Tesla LIN reverse-engineering and anti-nag chip project. Covers passive LIN capture, active frame injection, Model 3/Y/X steering wheel volume control, and the custom dual-LIN ESP32-S3 Rev A PCB (JLCPCB order).

Local path: C:\Users\ezabz\Code\tesla-lin-chip GitHub: https://github.com/lakewoodphone/tesla-lin-chip

Start with STARTHERE.md when resuming. It now points to the current Rev A ESP32-S3 dual-LIN Model 3 active anti-nag path. Older XIAO/APG discovery notes are preserved under docs/archive/legacy-xiao-2026-06-17/` and should be treated as historical evidence, not the active operating…

Main components on the Tesla dual lin rev a

ESP32-S3-WROOM-1U-N8R8TJA1021T carTJA1021T wheelLM5164DDA

Tesla dual lin rev a bill of materials (BOM)

45 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1U-N8R8
ESP32-S3-WROOM-1U
U1
1
TJA1021T car
U2
1
TJA1021T wheel
U3
1
LM5164DDA
U4
1
AO4407A PFET
Q1
1
USB-C
J1
1
Molex Micro-Fit car service
J2
1
Molex Micro-Fit wheel service
J3
1
22uF 10V
C_3V3
5
100nF
C_BST1, C_U1_DEC1, C_U2_DEC1, C_U3_DEC1, C_U4_DEC1
1
1uF 10V
C_EN1
1
10uF 50V
C_IN1
2
DNP LIN master diode
D_LINA_MASTER1, D_LINB_MASTER1
1
1812 PPTC
F1
19
0603
R_ARMSENSE_PD1, R_BOOT1, R_BUCK_EN1, R_BUCK_RON1, R_CC1, R_CC2, R_EN1, R_FB_BOT1 +11
1
DPDT ARM
SW1
1
SMBJ24A
D1
1
LIN_A ESD
D2
1
LIN_B ESD
D3
1
USBLC6-2SC6
USB ESD
D4
Show 2 more
QtyPartRefs
1
1206 ferrite
FB1
1
SRU5016-100Y
10uH
L1

Tesla dual lin rev a design files

The KiCad project lives in the lakewoodphone/tesla-lin-chip repository on GitHub; these links point at the commit this page was built from.

Tesla dual lin rev a: common questions

What microcontroller does the Tesla dual lin rev a use?

The Tesla dual lin rev a is built around the ESP32-S3-WROOM-1U-N8R8, from the ESP32 family.

How big is the Tesla dual lin rev a PCB?

The Tesla dual lin rev a measures 100 × 56 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Tesla dual lin rev a?

45 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tesla dual lin rev a design files?

From the lakewoodphone/tesla-lin-chip repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Tesla dual lin rev a design in my own project?

The repository has no license, so all rights stay with lakewoodphone. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tesla dual lin rev a without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in tesla-lin-chip

Similar boards