Dude dirty usb disconnect
ldab·dude-dirty-usb-disconnect·PCB/ssus/ssus.kicad_pcb
About the Dude dirty usb disconnect PCB
Dude dirty usb disconnect is an open source ESP32 PCB design by ldab, published on GitHub under the WTFPL license. It is a 2-layer board measuring 40 × 50 mm, with 36 components from 18 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the CH334R, RT9080-33GJ5 and TPS2065CDBV. By type, the board carries 12 capacitors, 9 resistors, 4 ICs, 4 diodes, 3 connectors and 1 crystal.
It belongs with the usb & debug tools and iot & wireless designs in this gallery.
From the project
DUDE, Dirty USB Disconnect. ESP32-S3 host powered, managed 2x USB Hub
USB CDC-ACM uart like controlled USB Hub:
- 1.5A fuse; - Power switch with overcurrent, undervoltage and overtemperature protection; - ESD Protection diodes on the USB lines;
- [ ] WebBle - [ ] Web flasher, like: https://esphome.github.io/esp-web-tools/ (does it work over CDC?) - [ ] Get a PID from https://pid.codes/howto/ (only found how to change TinyUSB PID) - [ ] There is some overflow around the help print for the hubsettings - [ ] 3D printed case - [x] sdkconfig.default` for release with CDC (no jtag)

Main components on the Dude dirty usb disconnect
Dude dirty usb disconnect bill of materials (BOM)
36 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH334R | QSOP-16_3.9x4.9mm_P0.635mm | U1 |
| 1 | RT9080-33GJ5 | SOT-23-5 | U2 |
| 1 | ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U3 |
| 1 | TPS2065CDBV | SOT-23-5 | U4 |
| 1 | 12MHZ 12MHz | Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | Y1 |
| 2 | C42641 USB_A | USB_A_TE_292303-7_Horizontal | J2, J3 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4 |
| 1 | 1.5A | Fuse_1206_3216Metric | F1 |
| 1 | 2 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SW_Push | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | C108793 LED_RBAG | LED_Cree-PLCC4_2x2mm_CW | D1 |
| 3 | PRTR5V0U2X | SOT-143 | D2, D3, D4 |
| 3 | 1u | C_0603_1608Metric | C1, C2, C12 |
| 5 | 100N 100n | C_0603_1608Metric | C3, C5, C6, C7, C11 |
| 1 | 150UF 150uF | C_Elec_6.3x5.4 | C4 |
| 3 | 10U 10u | C_0603_1608Metric | C8, C9, C10 |
| 5 | 5.1K | R_0603_1608Metric | R1, R2, R6, R8, R9 |
| 4 | 1K | R_0603_1608Metric | R3, R4, R5, R7 |
Dude dirty usb disconnect design files
The KiCad project lives in the ldab/dude-dirty-usb-disconnect repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/ssus/ssus.kicad_pcb
- SchematicPCB/ssus/ssus.kicad_sch
- BOMPCB/ssus/fab/BOM.csv
Dude dirty usb disconnect: common questions
What microcontroller does the Dude dirty usb disconnect use?
The Dude dirty usb disconnect is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the Dude dirty usb disconnect PCB?
The Dude dirty usb disconnect measures 40 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dude dirty usb disconnect?
36 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dude dirty usb disconnect design files?
From the ldab/dude-dirty-usb-disconnect repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dude dirty usb disconnect design in my own project?
Yes, under the terms of its WTFPL license, which ldab chose for the repository.
Can I test firmware for the Dude dirty usb disconnect without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k