AquaBoard
Lekylouch·AquaBoard·hardware/kicad/aquaguard.kicad_pcb
About the AquaBoard PCB
AquaBoard is an open source ESP32 PCB design by Lekylouch, published on GitHub. It is a 2-layer board measuring 98.7 × 55.6 mm, with 62 components from 33 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the LORA-E5, L80-R, TMAG5231B1DQDBZR, LTC3113IFE-TRPBF and LTC4412XS6. By type, the board carries 20 resistors, 13 capacitors, 7 diodes, 6 ICs, 6 connectors and 2 jumpers.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
Carte électronique AquaGuard. Conçue sous KiCad, en cours de migration vers Altium Designer.
Carte électronique AquaGuard. Conçue sous KiCad, en cours de migration vers Altium Designer.
1. Ouvrir Altium Designer 2. File → Import Wizard → sélectionner "KiCad PCB Project" 3. Pointer vers hardware/kicad/aquaguard.kicadpro 4. Importer les footprints custom depuis hardware/footprints/ 5. Importer les symboles custom depuis hardware/symbols/ 6. Enregistrer le projet Altium dans hardware/altium/`
Main components on the AquaBoard
AquaBoard bill of materials (BOM)
62 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LORA-E5 LoRa-E5 | LoRa-E5 | U1 |
| 1 | ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U2 |
| 1 | L80-R | Quectel_L80-R | U3 |
| 1 | TMAG5231B1DQDBZR | SOT95P237X112-3N | U4 |
| 1 | LTC3113IFE-TRPBF | TSSOP-20_FE&slash_CA_LIT | U5 |
| 1 | LTC4412XS6 LTC4412xS6 | TSOT-23-6 | U6 |
| 1 | SUD50P04-08 | TO-252-2 | Q1 |
| 3 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J1, J3, J4 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | Conn_Coaxial | 919382J51P | J5 |
| 1 | ZX62D-B-5PA8(30) ZX62D-B-5PA8_30_ | ZX62DB5PA830 | J6 |
| 1 | Battery_Cell | BAT_1106 | BT1 |
| 2 | JUMPER_2_OPEN Jumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | CMT-13031-SMT | CUI_CMT-13031-SMT | LS1 |
| 2 | SW_Push | TL3301AF260QG | SW1, SW2 |
| 1 | ASMB-LTC3-0D335 | ASMBLTC30D335 | LED1 |
| 7 | 1N914 | D_SMA | D1, D2, D3, D4, D5, D6, D7 |
| 1 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | L1 |
| 1 | 2UH 2uH | WE-HCI_1040 | L2 |
| 5 | 0.1U 0.1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C6, C7 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NC | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8 |
| 1 | Supra | CAPCP3225X100N | C9 |
| 3 | 47U 47u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C10, C11, C12 |
| 1 | 6.8N 6.8n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13 |
| 2 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R20 |
| 6 | 499 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R7, R8, R9, R10 |
| 3 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R16 |
| 2 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R11 |
| 4 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14, R15 |
| 1 | 909K 909k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 47K 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 200K 200k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
AquaBoard design files
The KiCad project lives in the Lekylouch/AquaBoard repository on GitHub; these links point at the commit this page was built from.
AquaBoard: common questions
What microcontroller does the AquaBoard use?
The AquaBoard is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the AquaBoard PCB?
The AquaBoard measures 98.7 × 55.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AquaBoard?
62 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AquaBoard design files?
From the Lekylouch/AquaBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AquaBoard design in my own project?
The repository has no license, so all rights stay with Lekylouch. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AquaBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k