17 open source boards using the LTC4412XS6

Real designs built with the LTC4412XS6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the LTC4412XS6

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LTC4412XS6 connects to, and the resistors, capacitors and other passives placed on it.

  • The CTL pin is tied to GND on 10 of 11 designs.
  • The SENSE pin has a capacitor to GND on 7 of 11 designs, most often 10 µF (then 1 µF).
  • The VIN pin has a capacitor to GND on 6 of 11 designs, most often 100 nF (then 10 µF).
  • The STAT pin has a pull-up to 3.3V on 5 of 11 designs, most often 470 kΩ (then 1.47 MΩ).
VINpin 1Connected to: Signal 82% · VCC 18%
  • Capacitor to GND on 55% · 100 nF (3), 10 µF (2), 22 µF (2)
GNDpin 2Connected to: GND 100%
CTLpin 3Connected to: GND 91%
STATpin 4Connected to: The microcontroller 27% · not connected 36%
  • Pull-up to 3.3V on 45% · 470 kΩ (3), 1.47 MΩ (1), 470 Ω (1)
SENSEpin 6Connected to: Signal 64% · VIN 36%
  • Capacitor to GND on 64% · 10 µF (4), 1 µF (4), 22 µF (3)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Horizon by Horizon-Avionics, Cameraboard by AFS-pt, PickleRick by icl-rocketry and Plant-Health-Meter by MarkusVLA.

The LTC4412XS6 in open source designs

The gallery holds 17 open source boards using the LTC4412XS6 from 12 GitHub repositories; a typical one measures about 85.5 × 63.8 mm and carries around 77 components.

56% use four copper layers or more, and 24% carry an open source license.

The most starred is Horizon by Horizon-Avionics.

Microcontrollers on boards using the LTC4412XS6

LTC4412XS6: common questions

Where can I find a LTC4412XS6 reference design?

Each of the 17 boards on this page is a real design using the LTC4412XS6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LTC4412XS6 CTL pin connected?

The CTL pin is tied to GND on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the LTC4412XS6.

How is the LTC4412XS6 SENSE pin connected?

The SENSE pin has a capacitor to GND on 7 of 11 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the LTC4412XS6.

How is the LTC4412XS6 VIN pin connected?

The VIN pin has a capacitor to GND on 6 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the LTC4412XS6.

What parts are used alongside the LTC4412XS6?

The MMC5983MA, AP2112K-3.3, BNO085, ESP32-S3 and ESP32-S3-MINI-1 appear in the most repositories here.

Which microcontrollers do boards using the LTC4412XS6 use?

Most are built on ESP32 (9), STM32 (2), FPGA (1) and NXP (1).

How big is a typical board using the LTC4412XS6?

The median is 85.5 × 63.8 mm, and 44% are two-layer designs.

What is the most popular open source board using the LTC4412XS6?

By GitHub stars, Horizon by Horizon-Avionics, with 17 stars.

Can I simulate one of these boards using the LTC4412XS6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part