10 open source boards using the L80-R
Real designs built with the L80-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPVDrone
ammarjmahmood
7.5 × 10.8 mm2 parts2LNo license6Trainlog
Jana-Marie
4.2 × 16.4 mm2 parts2LCERN-OHL-S-2.06RP2040/RP2350
AvionicsGPS
esb8
60 × 56.1 mm53 parts4LNo license3STM32
Kicad rfm95-breakout board
Bamelink
69.2 × 67 mm60 parts2LNo license1ESP32
Telem3
5aji
124 × 80 mm151 parts4LNo license0AVR/Arduino
Nixie Clock
PennyLekas
115 × 80 mm94 parts2LCERN-OHL-S-2.00Nordic nRF
GPS-Tracker
zzertexx
65 × 38.5 mm71 parts4LNo license0ESP32
AquaBoard
Lekylouch
98.7 × 55.6 mm62 parts2LNo license0ESP32
Home health care
nguyen-van-phuong-19
50 × 41.3 mm49 parts4LNo license0L80 GPS daughter board v1
deogratius2phantom
29.8 × 35.1 mm19 parts4LNo license0
How designs wire the L80-R
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the L80-R connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 10 µF).
- The V_BCKP pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 10 µF).
- The RESERVED pins is left unconnected on 93% of them (a signal on 2).
- The 1PPS pin is left unconnected on 6 of 9 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 12 | Connected to: GND 100% | — |
| VCCpin 4 | Connected to: Signal 67% · 3.3V 33% |
|
| V_BCKPpin 5 | Connected to: 3.3V 67% · a signal 33% |
|
| 1PPSpin 6 | Connected to: Not connected 67% · a signal 33% | — |
| RESERVEDpin 7, 8, 11 | Connected to: Not connected 93% | — |
| NCpin 9 | Connected to: Not connected 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Trainlog by Jana-Marie, AvionicsGPS by esb8, Kicad rfm95-breakout board by Bamelink and Telem3 by 5aji.
The L80-R in open source designs
The gallery holds 10 open source boards using the L80-R from 10 GitHub repositories; a typical one measures about 62.5 × 48.4 mm and carries around 57 components.
50% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Trainlog by Jana-Marie.
Parts used alongside the L80-R
Microcontrollers on boards using the L80-R
What boards using the L80-R are built for
L80-R: common questions
Where can I find a L80-R reference design?
Each of the 10 boards on this page is a real design using the L80-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L80-R VCC pin connected?
The VCC pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the L80-R.
What decoupling capacitors do designs use on the L80-R V_BCKP pin?
The V_BCKP pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the L80-R.
How is the L80-R RESERVED pin connected?
The RESERVED pins is left unconnected on 93% of them (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the L80-R.
What parts are used alongside the L80-R?
The AP2112K-3.3, CH340C, ESP32-S3-MINI-1 and W25Q128JVS appear in the most repositories here.
Which microcontrollers do boards using the L80-R use?
Most are built on ESP32 (3), AVR/Arduino (1), Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the L80-R?
The median is 62.5 × 48.4 mm, and 50% are two-layer designs.
What is the most popular open source board using the L80-R?
By GitHub stars, Trainlog by Jana-Marie, with 6 stars.
Can I simulate one of these boards using the L80-R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.