ELE MB A1

Les-opossums·ELE_MB_A1

ELE MB A1 PCB layout, top view — open source ESP32 board by Les-opossums

About the ELE MB A1 PCB

ELE MB A1 is an open source ESP32 PCB design by Les-opossums, published on GitHub. It is a 4-layer board measuring 80 × 56 mm, with 131 components from 27 distinct parts.

Its main chip is the XIAO-ESP32-C3-DIP, from the ESP32 family. Other key parts include the TPS54302, SN65HVD230 and SN74LVC1T45DBV. By type, the board carries 57 resistors, 24 capacitors, 21 connectors, 10 diodes, 6 ICs and 6 transistors.

From the project

Motherboard

Electronic board - Motherboard - Main robot - A1

ELE MB A1, from the project README
From the project README

Main components on the ELE MB A1

ELE MB A1 bill of materials (BOM)

131 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TPS54302
U101, U102
1
SN65HVD230
U103
2
SN74LVC1T45DBV
U104, U105
1
XIAO-ESP32-C3-DIP
U106
5
2N7002
Changjiang Electronics Tech (CJ)
Q101, Q103, Q104, Q105, Q106
1
SI2301CDS-T1-GE3
Vishay Intertech
Q102
1
CONN_01X02
Conn_01x02
J101
5
CONN_01X02
Conn_01x02
J102, J103, J104, J105, J106
7
CONN_01X04
Conn_01x04
J107, J109, J111, J112, J114, J116, J119
8
CONN_01X03
Conn_01x03
J108, J110, J113, J115, J117, J118, J120, J121
1
~
JP102
4
TestPoint
TP102, TP103, TP104, TP105
9
C2286
Red
Hubei KENTO Elec
D101, D102, D103, D104, D106, D107, D108, D109 +1
1
B5818WS
hongjiacheng
D105
2
SL1050-100M
L101, L102
4
100NF
100nF
YAGEO
C101, C102, C105, C107
11
100NF
100nF
Samsung Electro-Mechanics
C103, C114, C115, C116, C117, C118, C119, C120 +3
2
10UF
10uF
Samsung Electro-Mechanics
C104, C106
2
47PF
47pF
FH(Guangdong Fenghua Advanced Tech)
C108, C111
5
22UF
22uF
Samsung Electro-Mechanics
C109, C110, C112, C113, C122
Show 7 more
QtyPartRefs
8
1kΩ
UNI-ROYAL(Uniroyal Elec)
R101, R102, R119, R127, R154, R155, R156, R157
6
100kΩ
UNI-ROYAL(Uniroyal Elec)
R103, R104, R113, R116, R124, R132
15
100Ω
UNI-ROYAL(Uniroyal Elec)
R105, R106, R115, R121, R122, R123, R129, R130 +7
2
120Ω
UNI-ROYAL(Uniroyal Elec)
R107, R108
20
10kΩ
UNI-ROYAL(Uniroyal Elec)
R109, R110, R114, R118, R120, R126, R128, R134 +12
2
3.3kΩ
UNI-ROYAL(Uniroyal Elec)
R111, R112
4
330Ω
UNI-ROYAL(Uniroyal Elec)
R117, R125, R133, R142

ELE MB A1 design files

The KiCad project lives in the Les-opossums/ELE_MB_A1 repository on GitHub; these links point at the commit this page was built from.

ELE MB A1: common questions

What microcontroller does the ELE MB A1 use?

The ELE MB A1 is built around the XIAO-ESP32-C3-DIP, from the ESP32 family.

How big is the ELE MB A1 PCB?

The ELE MB A1 measures 80 × 56 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ELE MB A1?

131 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ELE MB A1 design files?

From the Les-opossums/ELE_MB_A1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ELE MB A1 design in my own project?

The repository has no license, so all rights stay with Les-opossums. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ELE MB A1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards