Kicad carte lidar
Les-opossums·kicad-carte_lidar
About the Kicad carte lidar PCB
Kicad carte lidar is an open source RP2040/RP2350 PCB design by Les-opossums, published on GitHub. It is a 4-layer board measuring 68 × 68 mm, with 66 components from 40 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the TPS54302, W25Q128JVS, USBLC6-2P6, NM/AMS1117-3.3 and MPU-6000. By type, the board carries 24 capacitors, 18 resistors, 10 connectors, 7 ICs, 2 LEDs and 1 crystal.
From the project
Cette carte se trouve dans le mat de balise du robot opossum. Elle doit : - Gérer le lidar A2M12 (alimentation + récupération des données). - Gérer un accéléromètre mpu-6000 et l'utiliser pour corriger les points lidar. - Gérer le ruban led qui entoure le mat de balise La communi
Cette carte se trouve dans le mat de balise du robot opossum. Elle doit : - Gérer le lidar A2M12 (alimentation + récupération des données). - Gérer un accéléromètre mpu-6000 et l'utiliser pour corriger les points lidar. - Gérer le ruban led qui entoure le mat de balise La communication avec le raspberry pi se fait soit par USB (également utilisé pour programmer le rp2040) soit via ethernet avec un module W5500.

Main components on the Kicad carte lidar
Kicad carte lidar bill of materials (BOM)
66 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54302 | SOT-23-6 | U1 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | USBLC6-2P6 | SOT-666 | U5 |
| 2 | NM/AMS1117-3.3 | SOT-223-3_TabPin2 | U6, U9 |
| 1 | MPU-6000 | InvenSense_QFN-24_4x4mm_P0.5mm | U7 |
| 1 | S2D12.000000B20F30T | Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | Conn_01x03_Pin | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | Conn_01x05_Socket | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 2 | Conn_01x06_Socket | PinHeader_1x06_P2.54mm_Vertical | J6, J9 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7051x | J8 |
| 3 | Conn_01x06_Socket | JST_XH_B6B-XH-AM_1x06_P2.50mm_Vertical | J10, J11, J12 |
| 1 | Conn_01x04_Socket | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J14 |
| 1 | JK-SMD300L-24V | Fuse_2920_7451Metric | F1 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 2 | YELLOW | LED_0805_2012Metric | LED1, LED2 |
| 1 | MBR120VLSFT1G | D_SOD-123F | D1 |
| 1 | PSPMAQ0605H-150M-ANP | Prod_Tech_7.1x6.6mm | L1 |
| 2 | 10µF 50V | C_1206_3216Metric | C1, C2 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF 50V | C_0805_2012Metric | C3 |
| 1 | 100nF 50V | C_0402_1005Metric | C4 |
| 1 | 150pF 50V | C_1206_3216Metric | C5 |
| 5 | 22µF 25V | C_0805_2012Metric | C6, C7, C8, C9, C10 |
| 4 | 0.1uF 10V | C_0402_1005Metric | C21, C24, C25, C27 |
| 1 | 220nF 50V | C_0402_1005Metric | C22 |
| 1 | 2.2nF 10V | C_0402_1005Metric | C23 |
| 7 | 1uF 6.3V | C_0402_1005Metric | C26, C31, C32, C33, C34, C35, C36 |
| 1 | 220nF 16V | C_0402_1005Metric | C28 |
| 1 | 100k | R_0603_1608Metric | R1 |
| 1 | 13.3k | R_0603_1608Metric | R2 |
| 1 | 100R | C_0402_1005Metric | R3 |
| 2 | 10k | C_0402_1005Metric | R4, R16 |
| 1 | 330R | R_0603_1608Metric | R5 |
| 4 | 1k | R_0402_1005Metric | R6, R8, R15, R18 |
| 1 | 100k | R_0402_1005Metric | R7 |
| 2 | 5.1k | R_0402_1005Metric | R11, R12 |
| 2 | 27R | R_0402_1005Metric | R13, R14 |
| 1 | 10k | R_0402_1005Metric | R17 |
| 2 | 4.7k | R_0402_1005Metric | R24, R25 |
Kicad carte lidar design files
The KiCad project lives in the Les-opossums/kicad-carte_lidar repository on GitHub; these links point at the commit this page was built from.
- Layoutcarte_lidar.kicad_pcb
- Schematiccarte_lidar.kicad_sch
Kicad carte lidar: common questions
What microcontroller does the Kicad carte lidar use?
The Kicad carte lidar is built around the RP2040, from the RP2040/RP2350 family.
How big is the Kicad carte lidar PCB?
The Kicad carte lidar measures 68 × 68 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kicad carte lidar?
66 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad carte lidar design files?
From the Les-opossums/kicad-carte_lidar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad carte lidar design in my own project?
The repository has no license, so all rights stay with Les-opossums. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kicad carte lidar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k