HardLabs

VGA SRAM SHUIELD DOUBLE BUFFER

levvayner·VGA_PLD·VGA_SRAM_SHIELD_DOUBLE_BUFFER/VGA_SRAM_SHUIELD_DOUBLE_BUFFER.kicad_pcb

VGA SRAM SHUIELD DOUBLE BUFFER PCB layout, top view — open source AVR/Arduino board by levvayner

About the VGA SRAM SHUIELD DOUBLE BUFFER PCB

VGA SRAM SHUIELD DOUBLE BUFFER is an open source AVR/Arduino PCB design by levvayner, published on GitHub. It is a 6-layer board measuring 125 × 53.5 mm, with 44 components from 35 distinct parts.

Its main chip is the Arduino_Due_Shield, from the AVR/Arduino family. Other key parts include the K6X8008T2B-TF55, 74HC245, 74LS161, GAL22V10 and 74LS32. By type, the board carries 22 ICs, 12 resistors, 7 connectors, 1 module, 1 crystal and 1 capacitor.

From the project

If choosing the former, follow Atmel's instructions using the included .pld files. If chosing the latter, you can open the workspace and you will see both projects. You can build and deploy the projects right from Code!

If choosing the former, follow Atmel's instructions using the included .pld files. If chosing the latter, you can open the workspace and you will see both projects. You can build and deploy the projects right from Code!

You will need to download the Atmel Wincupl progam either way. If you chose to use VS code, you will also need to download and install minipro. More instructions about requirements can be found in the VS Cupl repo https://github.com/levvayner/ATF15xx-cupl

Main components on the VGA SRAM SHUIELD DOUBLE BUFFER

K6X8008T2B-TF5574HC24574LS161GAL22V1074LS3274LS0874HC0074HC14Arduino_Due_Shield

VGA SRAM SHUIELD DOUBLE BUFFER bill of materials (BOM)

44 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
K6X8008T2B-TF55
74HC245
U1
3
74HC245
U2, U11, U18
5
74LS161
74HC245
U3, U5, U6, U7, U10
1
74LS161
ATF1504AS
U4
1
GAL22V10
74HC14
U8
1
GAL22V10
74HC245
U9
1
74HC245
74LS08
U12
1
74HC245
74LS32
U13
1
74HC245
DATA_BANK1
U14
1
74LS32
DATA_BANK2
U15
1
74LS08
74HC245
U16
1
74HC00
74HC245
U17
1
74HC14
K6X8008T2B-TF55
U19
1
74HC245
K6X8008T2B-TF55
U20
2
74HC245
U21, U22
1
Arduino_Due_Shield
A1
1
TCXO-14
X1
1
USB_A_Stacked
J1
1
ANALOG
J2
1
DE15_RECEPTACLE_HIGHDENSITY
Mini-DIN-6
J3
Show 15 more
QtyPartRefs
1
PWR AUX
J4
1
ISP
J5
1
Micro_SD_Card
J6
1
AUDIO
J8
1
560PF
4.7nF
C1
1
R470
R490K
R1
1
R900
R3.9K
R2
1
R1.5K
R800
R3
2
R470
R4, R7
1
R900
R1.8K
R5
1
R1.5K
R1.2K
R6
1
R900
R2.2K
R8
1
R1.8K
R9
1
R10K
R470
R10
2
R100
R19, R20

VGA SRAM SHUIELD DOUBLE BUFFER design files

The KiCad project lives in the levvayner/VGA_PLD repository on GitHub; these links point at the commit this page was built from.

VGA SRAM SHUIELD DOUBLE BUFFER: common questions

What microcontroller does the VGA SRAM SHUIELD DOUBLE BUFFER use?

The VGA SRAM SHUIELD DOUBLE BUFFER is built around the Arduino_Due_Shield, from the AVR/Arduino family.

How big is the VGA SRAM SHUIELD DOUBLE BUFFER PCB?

The VGA SRAM SHUIELD DOUBLE BUFFER measures 125 × 53.5 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the VGA SRAM SHUIELD DOUBLE BUFFER?

44 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the VGA SRAM SHUIELD DOUBLE BUFFER design files?

From the levvayner/VGA_PLD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the VGA SRAM SHUIELD DOUBLE BUFFER design in my own project?

The repository has no license, so all rights stay with levvayner. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VGA SRAM SHUIELD DOUBLE BUFFER without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in VGA_PLD

Similar boards