42 open source boards using the GAL22V10
Real designs built with the GAL22V10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Jupiter-II
ricaflops
164.5 × 89.5 mm122 partsMIT43C128-z80-8mhz
ytmytm
31.5 × 75.7 mm11 parts2LNo license28Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24MegaCD-Connect-BD-Remake
Board-Folk
98 × 44 mm17 parts2LCC0-1.022MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18AVR/Arduino
Playground 68030 Mk I
thorpej
259.9 × 154.9 mm227 parts6LNo license15Jupiter-II-Expansion
ricaflops
164.5 × 71.8 mm95 parts2LMIT15Tlcs90-rom reader
sergiopolog
111.8 × 121.9 mm54 parts2LGPL-3.015AVR/Arduino
CortexPC
danwerner21
244 × 244 mm155 parts2LNo license7Betadisk clone
alvaroalea
99.7 × 149.9 mm83 parts2LNo license7Main
ceteras
299.2 × 180 mm434 parts2LMIT5NXP
LFlex21
laurent-fr
180.3 × 120.7 mm77 parts2LNo license4AVR/Arduino
VGA SRAM Shield
levvayner
97.8 × 53.7 mm51 parts4LNo license4Dragon32Rev3
jimbro1000
253 × 169.1 mm169 parts2LMIT3AVR/Arduino
Theroof
a-wai
60 × 53.6 mm18 parts2LCERN-OHL-1.23AVR/Arduino
TK-80BS SD
yanataka60
142.5 × 78 mm19 parts2LMIT2C128-u3-replacement
ytmytm
21.5 × 37.3 mm5 parts2LMIT2TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Exordisk v1
roberto314
160 × 100 mm110 parts2LNo license1Mini-8085
89Mods
155.1 × 97.8 mm67 parts2LMIT1KIM-1 RAMpager
hkzlab
123.4 × 134.6 mm65 parts2LCC-BY-NC-4.01AM9511 for TRS-80 M2
GreyZ80
130 × 47.7 mm27 parts2LGPL-3.01- schematic only · 69 parts
Yaufp8088
fifteenhex
69 partsGPL-3.01 M68k
ziggekatten
721.4 × 330.6 mm130 parts4LMIT0AS2650 board
AvalonSemiconductors
96.9 × 67.9 mm76 parts4LApache-2.00Xosera
rosco-m68k
122 × 92 mm43 parts4LMIT17NQVME Expansion Board Template
thorpej
151.9 × 99.8 mm9 parts4LNo license15VGA SRAM COMP
levvayner
86.5 × 75 mm50 parts4LNo license4TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Address register bank
lafehubert
114.3 × 90.3 mm99 parts4LNo license0Amiga3000-romy
reinauer
40.1 × 55.5 mm4 parts2LNo license31PIC
DandaCartBase
OldWer
84.7 × 65.5 mm16 parts2LNo license8AVR/Arduino
VGA SRAM SHUIELD DOUBLE BUFFER
levvayner
125 × 53.5 mm44 parts6LNo license4Exorset Floppy
roberto314
160 × 100 mm85 parts2LNo license1MemExpansion
ja1umi
155 × 114 mm27 parts2LMIT10AVR/Arduino
VGA SRAM SHIELD DB MULTIPLEX
levvayner
99.5 × 53.5 mm42 parts6LNo license4
How designs wire the GAL22V10
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the GAL22V10 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 14 of 31 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 91% | — |
| VCCpin 24 | Connected to: 5V 84% · a signal 16% |
|
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jupiter-II by ricaflops, Amiga3000-romy by reinauer, C128-z80-8mhz by ytmytm and Plusd by alvaroalea.
The GAL22V10 in open source designs
The gallery holds 42 open source boards using the GAL22V10 from 33 GitHub repositories; a typical one measures about 130 × 97.8 mm and carries around 62 components.
65% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Jupiter-II by ricaflops.
Parts used alongside the GAL22V10
Microcontrollers on boards using the GAL22V10
What boards using the GAL22V10 are built for
GAL22V10: common questions
Where can I find a GAL22V10 reference design?
Each of the 42 boards on this page is a real design using the GAL22V10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the GAL22V10 VCC pin?
The VCC pin has a decoupling capacitor on 14 of 31 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 32 open source designs using the GAL22V10.
What parts are used alongside the GAL22V10?
The 74LS74, 74LS04, 74LS08, 74LS245 and 74LS32 appear in the most repositories here.
Which microcontrollers do boards using the GAL22V10 use?
Most are built on AVR/Arduino (8), NXP (1) and PIC (1).
How big is a typical board using the GAL22V10?
The median is 130 × 97.8 mm, and 65% are two-layer designs.
What is the most popular open source board using the GAL22V10?
By GitHub stars, Jupiter-II by ricaflops, with 43 stars.
Can I simulate one of these boards using the GAL22V10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.