Esp32-s3-rf devboard akel

lilnetty43·esp32-s3-rf-devboard_akel·hardware/ESP32S3_RF_DevBoard.kicad_pcb

Esp32-s3-rf devboard akel PCB layout, top view — open source ESP32 board by lilnetty43

About the Esp32-s3-rf devboard akel PCB

Esp32-s3-rf devboard akel is an open source ESP32 PCB design by lilnetty43, published on GitHub under the Custom license license. It is a 4-layer board measuring 25.4 × 60 mm, with 30 components from 22 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the ESD122DMYR, LD1117DT33CTR and SN74AHCT1G125DBVR. By type, the board carries 10 resistors, 8 capacitors, 4 ICs, 3 connectors, 2 switches and 2 diodes.

It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

From the project

This project is a custom 4-layer development board built around the ESP32-S3. I designed the board to expand my PCB design experience into an RF-aware layout, multi-layer stackup design, controlled-impedance USB routing, and manufacturing preparation.

This project is a custom 4-layer development board built around the ESP32-S3. I designed the board to expand my PCB design experience into an RF-aware layout, multi-layer stackup design, controlled-impedance USB routing, and manufacturing preparation.

My board include native USB-C programming and power, 5 V-to-3.3 V regulation, GPIO breakout headers, BOOT and RESET controls, protection circuitry, test points, and a programmable RGB status LED.

Esp32-s3-rf devboard akel, from the project README
From the project README

Main components on the Esp32-s3-rf devboard akel

Esp32-s3-rf devboard akel bill of materials (BOM)

30 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESD122DMYR
U1
1
LD1117DT33CTR
STMicroelectronics
U2
1
ESP32-S3-WROOM-1-N8
Espressif
U3
1
SN74AHCT1G125DBVR
TI(德州仪器)
U4
1
USB4105-GF-A
GCT
J1
2
PZ254V-11-22P
Conn_01x22
J2, J3
1
SKRPANE010
BOOT
ALPS ALPINE
SW1
1
SKRPANE010
RESET
ALPS ALPINE
SW2
1
XL-2121RGBC-2812B
XL-2121RGBC-WS2812B
XINGLIGHT(成兴光)
LED1
1
LESD5D5.0CT1G
D1
1
KT-0603R
RED
Hubei KENTO Elec
D2
3
0603B104K160CT
0.1uF
Walsin
C1, C7, C8
1
FS21B475K160EIG
4.7uF
PSA (Prosperity Dielectrics)
C2
1
T491B106M016AT
10uF
KEMET
C3
1
GRM188R61E106MA73D
10µF
Murata Electronics
C4
1
CL10B104KB8NNNC
0.1µF
Samsung Electro-Mechanics
C5
1
CL21B105KOFNNNE
1uF
Samsung Electro-Mechanics
C6
3
5.1k
R1, R2, R3
1
0R
UNI-ROYAL
R4
3
0603WAF1002T5E
10k
R5, R9, R10
Show 2 more
QtyPartRefs
2
0603WAF220JT5E
22R
UNI-ROYAL
R6, R7
1
0603WAF330JT5E
33R
UNI-ROYAL
R8

Esp32-s3-rf devboard akel design files

The KiCad project lives in the lilnetty43/esp32-s3-rf-devboard_akel repository on GitHub; these links point at the commit this page was built from.

Esp32-s3-rf devboard akel: common questions

What microcontroller does the Esp32-s3-rf devboard akel use?

The Esp32-s3-rf devboard akel is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.

How big is the Esp32-s3-rf devboard akel PCB?

The Esp32-s3-rf devboard akel measures 25.4 × 60 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Esp32-s3-rf devboard akel?

30 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32-s3-rf devboard akel design files?

From the lilnetty43/esp32-s3-rf-devboard_akel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32-s3-rf devboard akel design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Esp32-s3-rf devboard akel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards