6 open source boards using the ESD122DMYR
Real designs built with the ESD122DMYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SCAN
jjsprandel
153.3 × 53 mm181 parts6LCC-BY-NC-4.01STM32
Autotrainer Pellet Module
Mouse-GYM
114.3 × 108 mm140 parts4LNo license0Sarcat cm4
Bohlebots-Sarcat
140 × 70.5 mm34 parts2LNo license0ESP32
Esp32-s3-rf devboard akel
lilnetty43
25.4 × 60 mm30 parts4LCustom license0ESP32
SCAN mainboard
jjsprandel
100 × 70 mm54 parts2LCC-BY-NC-4.01STM32
Magnet Module
Mouse-GYM
71 × 89 mm117 parts4LNo license0
The ESD122DMYR in open source designs
The gallery holds 6 open source boards using the ESD122DMYR from 4 GitHub repositories; a typical one measures about 107.2 × 70.3 mm and carries around 86 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is SCAN by jjsprandel.
What boards using the ESD122DMYR are built for
ESD122DMYR: common questions
Where can I find a ESD122DMYR reference design?
Each of the 6 boards on this page is a real design using the ESD122DMYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESD122DMYR use?
Most are built on ESP32 (3) and STM32 (2).
How big is a typical board using the ESD122DMYR?
The median is 107.2 × 70.3 mm, and 33% are two-layer designs.
What is the most popular open source board using the ESD122DMYR?
By GitHub stars, SCAN by jjsprandel, with 1 stars.
Can I simulate one of these boards using the ESD122DMYR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.