Kicker breakout
About the Kicker breakout
Kicker breakout is an open source PCB design by LiU-SeeGoals, published on GitHub. It is a 2-layer board measuring 44 × 37.8 mm, with 14 components from 6 distinct parts.
By type, the board carries 10 resistors, 3 connectors and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Schematics etc.
Motor driver has 5 pins to the devboard, 2 power pins and 8 pins to the motor
Capacitors and components change capacitance, inductance, etc as the voltage changes. This was not know during the making of driver.
Capacitors should be closer to the pins they are filtering.
There is a risk of overheating if the motors get stuck for a longer time, adding some cooling would be nice.
Kicker breakout bill of materials (BOM)
14 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BSS84 | SOT-23 | Q1 |
| 1 | 1X04_P2.54MM 1x04_P2.54mm | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J1 |
| 1 | 1X08_P2.54MM 1x08_P2.54mm | Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J2 |
| 1 | DF13C_CL535-0412-6-51_1X12-1MP_P1.25MM_VERTICAL DF13C_CL535-0412-6-51_1x12-1MP_P1.25mm_Vertical | Hirose_DF13C_CL535-0412-6-51_1x12-1MP_P1.25mm_Vertical | J3 |
| 8 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RN7A1, RN7B1, RN7C1, RN7D1, RN8A1, RN8B1, RN8C1, RN8D1 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RN9A1, RN9D1 |
Kicker breakout design files
The KiCad project lives in the LiU-SeeGoals/Electronics repository on GitHub; these links point at the commit this page was built from.
Kicker breakout: common questions
How big is the Kicker breakout?
The Kicker breakout measures 44 × 37.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicker breakout?
14 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicker breakout design files?
From the LiU-SeeGoals/Electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kicker breakout design in my own project?
The repository has no license, so all rights stay with LiU-SeeGoals. Use it as a reference, and ask the author before reusing the design.
More boards in Electronics
Kicker Board (Initial design by A Ryll -Tigers)
140 × 85.4 mm63 parts2LNo license0
Power board
166 × 166 mm53 parts4LNo license0
STM32STM32H755ZI breakout board
70 × 95 mm38 parts4LNo license0
Driver seperate
37.9 × 34.2 mm19 parts4LNo license0
Motor driver board for pwr v2
30.5 × 31 mm16 parts2LNo license0
Imu LSM6DSL
25.4 × 21 mm9 parts4LNo license0
STM32Enc v1 a
24 × 15.5 mm3 parts2LNo license0
NRF to Nucleo H536ZI connector board
60 × 35 mm3 parts2LNo license0
STM32Enc v1 b
24 × 15.5 mm3 parts2LNo license0
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446