HardLabs

Imu LSM6DSL

LiU-SeeGoals·Electronics·imu_LSM6DSL_v1/imu_LSM6DSL/imu_LSM6DSL.kicad_pcb

Imu LSM6DSL PCB layout, top view — open source board by LiU-SeeGoals
Simulate this board

About the Imu LSM6DSL PCB

Imu LSM6DSL is an open source PCB design by LiU-SeeGoals, published on GitHub. It is a 4-layer board measuring 25.4 × 21 mm, with 9 components from 7 distinct parts.

Other key parts include the LSM6DSLTR. By type, the board carries 2 connectors, 2 capacitors, 1 IC, 1 diode and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

Schematics etc.

Main components on the Imu LSM6DSL

LSM6DSLTR

Imu LSM6DSL bill of materials (BOM)

9 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LSM6DSLTR
U1
1
CONN_01X02
Conn_01x02
J1
1
CONN_01X06
Conn_01x06
J2
2
1k
R_scl1, R_sda1
1
LED
D1
2
100NF
100nF
C1, C2
1
470
R-led1

Imu LSM6DSL design files

The KiCad project lives in the LiU-SeeGoals/Electronics repository on GitHub; these links point at the commit this page was built from.

Imu LSM6DSL: common questions

How big is the Imu LSM6DSL PCB?

The Imu LSM6DSL measures 25.4 × 21 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Imu LSM6DSL?

9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Imu LSM6DSL design files?

From the LiU-SeeGoals/Electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Imu LSM6DSL design in my own project?

The repository has no license, so all rights stay with LiU-SeeGoals. Use it as a reference, and ask the author before reusing the design.

More boards in Electronics

Similar boards