6 open source boards using the 74HCT4051
Real designs built with the 74HCT4051, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Tesla-Front-Drive-Unit
damienmaguire
190.5 × 176.6 mm196 parts4LNo license59Random Jazz Generator
telec16
167.8 × 200.6 mm126 parts2LNo license16RP2040/RP2350
EyeVolt
rbarzic
123.7 × 94 mm113 parts4LApache-2.00ESP32
PercussiveInterface-3
lleck
460 × 97.7 mm105 parts2LNo license0ESP32
PercussiveInterface-3.1
lleck
460 × 97.7 mm105 parts4LNo license0Z80-MIDI
dennis9819
160 × 100.3 mm32 parts2LNo license2
How designs wire the 74HCT4051
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT4051 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
- The E pin is tied to GND on 4 of 5 designs.
- The VEE pin is tied to GND on 4 of 5 designs.
- The A6 pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A6pin 2 | Connected to: Not connected 60% · a signal 40% | — |
| A7pin 4 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| A5pin 5 | Connected to: Not connected 60% · a signal 40% | — |
| Epin 6 | Connected to: GND 80% · a signal 20% | — |
| VEEpin 7 | Connected to: GND 80% · -10V 20% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tesla-Front-Drive-Unit by damienmaguire, Random Jazz Generator by telec16, Z80-MIDI by dennis9819 and PercussiveInterface-3 by lleck.
The 74HCT4051 in open source designs
The gallery holds 6 open source boards using the 74HCT4051 from 5 GitHub repositories; a typical one measures about 179.2 × 99 mm and carries around 109 components.
50% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Tesla-Front-Drive-Unit by damienmaguire.
Microcontrollers on boards using the 74HCT4051
What boards using the 74HCT4051 are built for
74HCT4051: common questions
Where can I find a 74HCT4051 reference design?
Each of the 6 boards on this page is a real design using the 74HCT4051. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT4051 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the 74HCT4051.
How is the 74HCT4051 E pin connected?
The E pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HCT4051.
How is the 74HCT4051 VEE pin connected?
The VEE pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HCT4051.
Which microcontrollers do boards using the 74HCT4051 use?
Most are built on ESP32 (2), ESP8266 (1) and RP2040/RP2350 (1).
How big is a typical board using the 74HCT4051?
The median is 179.2 × 99 mm, and 50% are two-layer designs.
What is the most popular open source board using the 74HCT4051?
By GitHub stars, Tesla-Front-Drive-Unit by damienmaguire, with 59 stars.
Can I simulate one of these boards using the 74HCT4051 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.