MitsubishiSC
loozhengyuan·MitsubishiSC·hardware/MitsubishiSC.kicad_pcb
About the MitsubishiSC PCB
MitsubishiSC is an open source ESP32 PCB design by loozhengyuan, published on GitHub under the MIT license. It is a 6-layer board measuring 50 × 43 mm, with 60 components from 24 distinct parts.
Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the TPS54202DDCR, TLV75733PDBVR and USBLC6-2SC6. By type, the board carries 21 capacitors, 20 resistors, 6 diodes, 4 ICs, 2 transistors and 2 fuses.
It belongs with the iot & wireless designs in this gallery.
From the project
Smart controller for Mitsubishi Electric HVAC systems.
Smart controller for Mitsubishi Electric HVAC systems.
The platformio.ini defines the list of build environments. Each board configuration comes in debug and release builds.
To compile the firmware, use the pio run command with the designated build environment.
To flash the build artifact to the board, connect the board and run the pio run command with the upload target.
Main components on the MitsubishiSC
MitsubishiSC bill of materials (BOM)
60 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-WROOM-1-N8 ESP32-C6-WROOM-1 Espressif | ESP32-C6-WROOM-1 | U1 |
| 1 | TPS54202DDCR TPS54202DDC Texas Instruments | SOT-23-6 | U2 |
| 1 | TLV75733PDBVR TLV75733PDBV Texas Instruments | SOT-23-5 | U3 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U4 |
| 2 | BSS138 onsemi | SOT-23 | Q1, Q2 |
| 1 | SM05B-PASS-TBT(LF)(SN) CN105 JST | JST_PA_SM05B-PASS_1x05_P2.00mm_Horizontal | J1 |
| 1 | 1206L035/16YR 350mA Littelfuse | Fuse_1206_3216Metric | F1 |
| 1 | 1206L012WR 125mA Littelfuse | Fuse_1206_3216Metric | F2 |
| 2 | GT-TC048D-H025-L1 SPST G-Switch | SW_SPST_PTS810 | SW1, SW2 |
| 2 | CUS10S30,H3F CUS10S30 TOSHIBA | D_SOD-323 | D1, D2 |
| 1 | SMF4L12A Littelfuse | D_SOD-123F | D3 |
| 1 | SMF4L5.0A Littelfuse | D_SOD-123F | D4 |
| 1 | XL-2012SURC RD XINGLIGHT | LED_0805_2012Metric | D5 |
| 1 | XL-2012UBC BU XINGLIGHT | LED_0805_2012Metric | D6 |
| 1 | BLM21PG221SN1D 220R@100MHz Murata Electronics | L_0805_2012Metric | FB1 |
| 1 | VLS6045EX-150M 15uH TDK | L_TDK_VLS6045EX_VLS6045AF | L1 |
| 9 | CL31B106KBHNNNE 10uF Samsung Electro-Mechanics | C_1206_3216Metric | C1, C5, C7, C10, C12, C13, C14, C15 +1 |
| 11 | CL10B104KC8NNNC 100nF Samsung Electro-Mechanics | C_0603_1608Metric | C2, C3, C4, C6, C8, C9, C11, C17 +3 |
| 1 | CL10C680JB8NNNC 68pF Samsung Electro-Mechanics | C_0603_1608Metric | C16 |
| 10 | RC0603FR-0710KL 10kR YAGEO | R_0603_1608Metric | R1, R2, R8, R10, R15, R16, R17, R18 +2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | RC0603FR-070RL 0R YAGEO | R_0603_1608Metric | R3, R4, R6, R7, R9, R11, R12 |
| 1 | RC0603FR-07470RL 470R YAGEO | R_0603_1608Metric | R5 |
| 1 | RC0603FR-07100KL 100kR YAGEO | R_0603_1608Metric | R13 |
| 1 | RC0603FR-0713K3L 13.3kR YAGEO | R_0603_1608Metric | R14 |
MitsubishiSC design files
The KiCad project lives in the loozhengyuan/MitsubishiSC repository on GitHub; these links point at the commit this page was built from.
MitsubishiSC: common questions
What microcontroller does the MitsubishiSC use?
The MitsubishiSC is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.
How big is the MitsubishiSC PCB?
The MitsubishiSC measures 50 × 43 mm, has 6 copper layers and is 1.5688 mm thick.
How many components are on the MitsubishiSC?
60 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the MitsubishiSC design files?
From the loozhengyuan/MitsubishiSC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MitsubishiSC design in my own project?
Yes, under the terms of its MIT license, which loozhengyuan chose for the repository.
Can I test firmware for the MitsubishiSC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k